Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
HVAC Company in Kensington, CA
Most HVAC calls we get from Kensington aren’t simple fixes. They’re diagnostic puzzles in 1950s – 1970s homes with oil boilers, single-zone hydronic baseboard, and no ductwork. A typical Kensington repair runs $150 – $700 depending on whether we’re replacing a failed igniter on a aging furnace or designing a cold-climate heat-pump conversion for a Cape Cod that’s never had forced air. Our technicians are dispatched from the San Francisco Bay Area office and serve Kensington locally, arriving with your name, photo, and ID badge already sent to your phone. Call us at (984) 538-9003 when you need a straight answer on what’s actually wrong.
Why Kensington Homes Are Different
Kensington sits in central Connecticut’s interior, far enough from Long Island Sound that we see roughly 6,000 – 6,500 heating degree days annually. That means real winter demand and genuine summer humidity, both of which matter for sizing equipment correctly.
The housing stock tells the bigger story. Most Kensington homes are Cape Cods, ranches, and split-levels built during Berlin’s suburban expansion from the late 1940s through the early 1970s. These places came with oil-fired cast-iron sectional boilers feeding single-zone baseboard hydronic runs. Many still have that original configuration, or a once-replaced boiler that’s now past end-of-life. Central ductwork is rare.
Here’s a pattern our techs spot every heating season: room additions and finished basements from the 1980s were often tee’d off that original single-zone loop with no separate thermostat. The whole house fights one control point. We get calls about cold bedrooms and overheated living rooms, and the fix is usually either a zone-valve retrofit or a full system redesign.
Connecticut’s Energize CT rebates and aggressive heat-pump incentives are pushing many Kensington homeowners toward oil-to-electric conversions right now. Without existing ducts, that means careful load calculations and often mini-split or hybrid designs. Oversized boilers sized for pre-insulation heat loss are another common find, short-cycling in homes that have since been air-sealed and causing efficiency losses we have to account for in any replacement.
Our Main Kensington Services
We handle three core services for Kensington homeowners, each with its own dedicated page and local pricing.
AC Repair in Kensington
Kensington summers carry real humidity, and when a compressor fails or refrigerant drops on a system that’s already working hard, you need it fixed fast. We stock common capacitors, contactors, and refrigerant for Trane, Lennox, and Goodman systems locally, and most repairs are completed in one visit. Because so many Kensington homes lack ductwork, we also service ductless mini-splits and window-unit conversions. AC Repair in Kensington covers typical failures, pricing, and what to check before you call.

Furnace Repair in Kensington
Most “furnace” calls in Kensington are actually oil-boiler or hydronic-system calls. We repair igniters, circulator pumps, zone valves, and boiler controls on Rheem, Lennox, and other major brands. The single-zone hydronic systems common here create specific failure modes: one cold room often means a stuck zone valve, not a broken boiler. We diagnose the real problem rather than replacing equipment you don’t need. Furnace Repair in Kensington has full details on boiler and hydronic repairs.

AC Maintenance in Kensington
Annual maintenance on Kensington systems means more than a filter swap. For ductless mini-splits, we clean blower wheels and check refrigerant charge; for aging central units, we inspect coils and test capacitors before summer demand peaks. Our tune-ups include a written report of what we found, what we adjusted, and what’s wearing. No upsell pressure, our techs aren’t paid on commission. AC Maintenance in Kensington explains what’s included and why it matters for local equipment.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Kensington
We service all major residential HVAC brands including Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Kensington’s common oil-to-heat-pump conversions, we stock parts for Trane, Lennox, and Goodman systems locally, which keeps most repair turnaround to same-day or next-day. See our brands for full coverage.
Pricing for HVAC Company in Kensington, CA
| Service | Typical range in Kensington |
|---|---|
| AC Repair (minor: capacitor, contactor) | $150 – $350 |
| AC Repair (major: compressor, coil) | $400 – $650 |
| Furnace/Boiler Repair (minor: igniter, sensor) | $150 – $300 |
| Furnace/Boiler Repair (major: heat exchanger, pump) | $450 – $700 |
| AC Installation (ductless mini-split) | $3,500 – $5,500 |
| AC Installation (full central system) | $5,500 – $7,500 |
| Annual AC Maintenance / Tune-Up | $80 – $200 |
What pushes Kensington prices toward the higher end: oil-to-electric conversions requiring electrical panel upgrades, homes with no existing ductwork needing mini-split multi-zone designs, and accessibility issues in older basements with tight clearances. Every job starts with a written price before any work begins. You’ll see the full cost, sign off, and only then do we start.
Neighborhoods We Serve in Kensington
We cover all of Kensington’s residential areas, from the original post-war subdivisions near the Berlin line to the more scattered builds toward the eastern edge. Most calls reach us within 30 – 45 minutes during business hours, and our 24/7 live answering means you’re never waiting on a callback queue.
- Kensington Village Center
- East Berlin Road area
- South Kensington (near the Middletown border)
- Webster Hill vicinity
- Four Corners district
Service Area – Cities Near Kensington
While Kensington is our focus here, our crews also work across the broader region. We regularly dispatch to Los Angeles, CA, San Diego, CA, San Jose, CA, and San Francisco, CA for homeowners who need the same verified-technician standard and upfront pricing we bring to every job.
Serving Kensington, CA - Our Local Coverage Area
We’re based in the Kensington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Kensington
We answer calls live 24 hours a day, and most Kensington homeowners see a technician within 2 – 4 hours for true emergencies: no heat below 40°F, no cooling above 85°F, or suspected gas leaks. You’ll receive your technician’s name, photo, and ID verification before they arrive. Call (984) 538-9003 to check current availability.
Yes, the Town of Berlin requires permits for boiler replacements, new furnace installations, and any fuel-type conversion such as oil-to-electric. We handle permit paperwork as part of our installation process and schedule inspections so you don’t have to coordinate with the building department yourself.
Kensington has no single overarching HOA, but individual subdivisions and newer developments may have architectural review requirements for outdoor condenser placement. We photograph proposed locations, provide spec sheets, and work directly with your association’s contact if approval is needed before installation begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local hvac pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Kensington Customers Say
"Maintenance plan is simple and the tech showed me the readings, not just said it was fine."
- Maribel C."Condenser fan motor replaced the same day. Clean, quick, and the quote didn't change."
- Lamar R."Very thorough check on the whole system before summer. Found a worn belt and swapped it for cheap."
- Jerome F.







Before
After
Before
After
Before
After