Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Atlanta
Most furnace repairs in Atlanta run $150 – $700 and are finished in a single visit. Our Furnace Repair team dispatches from our Atlanta office and covers homes from Grant Park to Buckhead to the Perimeter corridor, usually arriving same-day when you call before noon.
Atlanta’s heat-pump-dominant market means many “furnace” calls are actually failed auxiliary strip-heat systems or heat-pump defrost boards, especially after hard freezes and ice storms like 2014 and 2021. We stock parts for both gas furnaces and heat-pump auxiliary systems because we’ve learned that January ice events can overwhelm companies that only carry one or the other. When your heat goes out at 11 PM, you don’t want a tech who has to order parts. Call (984) 538-9003 and a live person picks up, 24 hours a day.
Why Brandt HVAC Is Atlanta’s Preferred Furnace Repair Company
We’ve been part of the Threshold Group family since 2003, and every Brandt HVAC location is independently owned and operated. Our Atlanta office handles dispatch and scheduling locally, so our techs know the difference between a 1920s Craftsman crawl space in Kirkwood and a 1990s suburban heat pump in Alpharetta before they arrive.
Our customers tell us the Threshold Verified standard matters most. We send you the technician’s name, photo, and background-check confirmation before we dispatch. They arrive in a clean uniform with a photo ID badge. If anyone shows up who you weren’t told to expect, that visit is on us and we make it right. For homeowners who are home alone, parents with young children, or older residents in intown neighborhoods, this isn’t a luxury. It’s how we work.
Every repair begins with a written price before any work starts. No exceptions. Every repair also carries a written guarantee: our 365-Day Done Right Promise. If the repair fails within that year, we return at no charge. No argument, no additional fee.
Phones are answered by a live person 24/7. Nights, weekends, holidays. No voicemail trees, no callback queues.
Furnace Maintenance in Atlanta
Furnace Maintenance in Atlanta is a twice-yearly job for most homeowners, once in early fall before the first cold snap and again in spring after pollen season. A tune-up costs $80 – $200 and includes cleaning burners, testing safety controls, checking heat exchanger integrity, measuring gas pressure, and inspecting the blower motor and belt. In Atlanta’s climate, maintenance prevents the auxiliary strip-heat failures that spike during ice storms and catches cracked heat exchangers before they pump carbon monoxide into a bungalow’s leaky ductwork.
Fall Pre-Heating Inspection
We check ignition systems, flame sensors, and heat exchanger condition before Atlanta’s first sustained cold period. A failed flame sensor on a November evening means no heat when temperatures drop into the twenties. We also test capacitor values on blower motors, since weak capacitors fail under the extended run times that Atlanta’s ice events demand.
Post-Pollen Coil and Drain Service
Atlanta’s tree canopy produces the densest pollen load of any major U.S. city. That yellow film packs condenser coils and clogs condensate drains within weeks. Our spring maintenance includes a dedicated coil cleaning and drain flush, which protects both cooling efficiency and the defrost drainage your heat pump needs during winter freeze cycles.
Heat Pump Repair in Atlanta
Heat Pump Repair in Atlanta addresses the systems that heat most metro homes, not traditional gas furnaces. A heat pump moves heat rather than generating it, using auxiliary electric strip heat when outdoor temperatures drop below the balance point, typically around 35 – 40°F. Repair costs fall in the same $150 – $700 range as furnace work. Atlanta’s periodic hard freezes stress these systems uniquely; when ice storms hit, mass failures of defrost boards, reversing valves, and strip-heat elements create emergency surges that warm-climate markets to the south never see.
Defrost Board and Reversing Valve Failures
Ice accumulation on the outdoor coil triggers the defrost cycle. A failed defrost board lets ice build until the system stops heating entirely. Reversing valves stuck in cooling mode blow cold air during a freeze. Both are common after Atlanta’s multi-day ice events, and we stock both parts because we’ve learned to expect them.
Auxiliary Strip-Heat Burnout
When temperatures drop into the teens, strip heat carries the full heating load. Older systems in intown bungalows often have undersized strips or corroded sequencers that fail under sustained demand. We test amp draw on every strip element and replace sequencers before they leave you without backup heat during the next ice storm.
Trusted Brands We Service in Atlanta
We repair and maintain Carrier, Trane, Lennox, Goodman, and Rheem systems, plus York, Daikin, Bryant, and American Standard. Our Atlanta warehouse stocks common ignitors, blower motors, heat exchangers, and defrost boards for Trane and Lennox systems prevalent in intown neighborhoods, and Goodman and Rheem parts common in suburban builds. That inventory means most repairs finish same-day rather than waiting on a parts run. We also source OEM heat exchangers for older Carrier furnaces still running in Grant Park and Virginia-Highland homes, units that outlasted their expected lifespan by a decade because they were built heavier than modern equivalents.
Common Furnace Repair Problems We See in Atlanta Homes
- Cracked heat exchangers in 1920s – 1950s bungalows. Undersized or leaky crawl-space ductwork in intown neighborhoods forces furnaces to run longer and hotter than designed. The heat exchanger metal fatigues, cracks, and can leak combustion gases into living spaces. We always inspect ductwork before quoting a replacement, because a new furnace on bad ducts cracks the same way.
- Single-zone systems fighting unbalanced floor plans. Many intown Atlanta homes have one thermostat for two or three stories with original floor plans never intended for forced air. During ice events, the system runs constantly, auxiliary strip heat engages, and capacitors or contactors fail from overwork. We measure temperature differentials room-to-room and often recommend zoning or duct modifications alongside repair.
- Electrical panels that can’t handle modern loads. Original panels in older intown houses may not accommodate the breaker size a new heat pump requires. We’ve arrived for a “furnace failure” and found a perfectly good unit tripping a 30-amp breaker on a panel rated for 20-amp maximums. The electrical upgrade has to happen before the HVAC work, or the new system fails the same way.
- Blower motors pulling high amps on degraded circuits. Weak capacitors, dirty blower wheels, and restricted return air from collapsed ductwork all raise amp draw. In Atlanta’s humid crawl spaces, wire connections corrode and terminals overheat. We test the full circuit, not just the motor, because replacing the motor without fixing the connection means a callback in six months.
Pricing for Furnace Repair in Atlanta, GA
We believe you should know what to expect before you call. Here’s what furnace work costs in the Atlanta market:
| Service | Price Range |
|---|---|
| Furnace Repair | $150 – $700 |
| Tune-Up / Maintenance | $80 – $200 |
Most repairs fall in the lower half of that range: ignitor replacements typically run $150 – $300, blower motor repairs $250 – $450, and control board replacements $300 – $600. Heat exchanger replacement pushes toward the upper end and sometimes exceeds it, which is why we always discuss repair-versus-replace honestly.
What affects your specific cost? The part needed, accessibility (a blower motor in a tight crawl space takes longer), and whether we find secondary issues like duct leaks or electrical limits during diagnosis. We give you a written price before any work starts. No exceptions. If the repair fails within 365 days, we return free under our Done Right Promise. Call (984) 538-9003 for a free estimate.
We Also Serve Cities Near Atlanta
Our crews work throughout the metro area, including Furnace Repair in Atlanta and surrounding communities: Smyrna, Mableton, Marietta, and Austell. Dispatch is coordinated from our Atlanta office, so response times to these nearby cities stay short even during ice-storm surges.
Serving Atlanta, GA - Our Local Coverage Area
We’re based in the Atlanta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Atlanta
Most breaker trips during ice storms are caused by auxiliary strip heat drawing more amps than your circuit can handle, often because a weak capacitor or dirty blower motor is already pushing the system near its limit. We test amp draw on every component and inspect your electrical panel’s breaker rating, because original panels in intown homes sometimes can’t support modern heat-pump loads. Call (984) 538-9003 and we’ll diagnose it properly.
Sometimes, but we won’t promise it without looking. We rolled to a 1940s Craftsman bungalow in Grant Park where a Carrier furnace kept short-cycling even after a new thermostat. Our tech found a cracked heat exchanger and a blower motor pulling high amps on a circuit that also had leaky original ductwork, so a like-for-like swap would have repeated the problem. We performed a load calculation, sealed the returns, and replaced the unit with a properly matched heat pump, restoring steady heat without the emergency strip-heat spikes. Every old house is different. We’ll show you what we find and give you options.
Twice yearly: once in early fall before heating season, and again in spring after pollen season. Atlanta’s humid subtropical climate means your system works hard for both cooling and heating, and the pollen surge demands a dedicated coil and drain cleaning. A tune-up costs $80 – $200 and catches the cracked heat exchangers, weak capacitors, and dirty flame sensors that cause mid-winter failures. Call (984) 538-9003 to schedule.
In Atlanta, you likely don’t have a separate furnace. Your heat pump’s defrost cycle or failed auxiliary strip heat is the culprit. During defrost, the system briefly runs in cooling mode to melt ice from the outdoor coil; a working strip-heat system should keep indoor air warm. If strip heat has failed, you’ll feel cold air during defrost and inadequate heat the rest of the time. We stock defrost boards, reversing valves, and strip-heat sequencers because this is one of Atlanta’s most common winter calls. Call (984) 538-9003 for same-day diagnosis.
Yes. We regularly repair Carrier and Trane systems from the 1980s and 1990s still running in Grant Park, Kirkwood, and Virginia-Highland. These units were built with heavier heat exchangers and simpler controls than modern equivalents, and many are worth repairing if the heat exchanger is intact and parts remain available. We carry common ignitors, blower motors, and control boards, and we’ll tell you honestly when repair makes sense versus replacement. Call (984) 538-9003 for a free evaluation.
Ready to get your heat back? Call Brandt HVAC at (984) 538-9003. A live person answers 24/7, and we’ll send you your technician’s name and photo before they arrive. Every repair comes with a written price upfront and our 365-Day Done Right Promise in writing.
Written by Devin Marlowe, Owner at Brandt HVAC, serving Atlanta since 2003.