Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Fast, Reliable Furnace Repair Across Azle
Most furnace repairs in Azle run $150 – $700 and our Furnace Repair team can usually diagnose the problem and present a written price the same day you call. When your heat goes out on a January night in Azle, you need someone who knows the local housing stock and shows up when they say they will. Brandt HVAC dispatches from our Dallas-Fort Worth office, with crews serving Azle neighborhoods directly. We answer the phone with a live person 24 hours a day, 7 days a week, including weekends and holidays. Call (984) 538-9003.
Why Brandt HVAC Is Azle’s Preferred Furnace Repair Company
We’ve worked on furnaces in Azle long enough to know what separates a routine ignitor swap from a slab-movement issue that traces back to the 2013 earthquake swarm. Our technicians are background-checked, uniformed, and introduced by name and photo before every visit under our Threshold Verified standard. When someone arrives at your door, you’ll already know their face, and they’ll show a photo ID badge. If anyone shows up who you weren’t told to expect, that visit is on us.
Our 365-Day Done Right Promise means every repair carries a written guarantee. If it fails within that period, we return at no charge. No argument, no additional fee. We also provide a written price before any work starts, every single time. No exceptions.
Heating Repair in Azle
Heating Repair in Azle covers everything from a failed ignitor in a 2010s Lennox to a cracked heat exchanger in a 1970s Goodman still running in the original townsite. Our crews handle forced-air gas furnaces, electric air handlers, heat pumps, and propane units common on rural properties past Eagle Mountain Lake where natural gas lines don’t reach. Most heating repairs in Azle fall between $150 – $700, with simpler fixes like ignitor or flame-sensor replacement at the lower end and heat exchanger or gas valve work toward the top. We stock parts for Trane, Lennox, Goodman, and Rheem to avoid delays.
Propane and Rural Systems
Properties along Jacksboro Highway and north toward Springtown often rely on propane furnaces with no wind shelter from open pasture. We size these systems differently, accounting for higher heat loss from exposed slab foundations and longer duct runs to outbuildings. Our written load calculations specify exactly what BTU output you need.
Post-Uri Emergency Replacements
After February 2021’s Winter Storm Uri, many Azle homeowners accepted emergency heat pump replacements with undersized components. Those systems are now failing from improper refrigerant charge and mismatched coils. We diagnose whether the root issue is the furnace itself or a compromised paired component.
Boiler Repair in Azle
Boiler Repair in Azle is less common than forced-air work, but critical for the homes and small commercial buildings that depend on hydronic heat. We service gas-fired boilers, electric boilers, and the circulation pumps that move hot water through baseboard or radiant systems. Most boiler repairs in Azle also fall within the $150 – $700 range, though cast-iron section replacement can run higher. We carry common ignition modules, aquastats, and circulator pumps on our trucks to minimize return trips.
Low-Pressure and Leak Diagnosis
Boilers in Azle lose pressure from expansion tank failure or micro-leaks at zone valves. We pressure-test the entire loop, identify whether the loss is at the boiler, the piping, or the emitters, and give you a written repair price before opening any valves.
Combustion Safety Checks
Every boiler repair includes combustion analysis to verify CO levels and draft pressure. In older Azle homes with original venting, we check for backdrafting conditions that newer high-efficiency units can create when paired with outdated chimneys.
Trusted Brands We Service in Azle
We repair Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard furnaces throughout Azle. Our trucks carry the most common failure parts for Lennox and Goodman units, which represent a large share of the local installed base. For Rheem and Trane systems, we source same-day from our Dallas-Fort Worth supply chain. Whether your furnace is two years old or twenty, we can get it running without telling you to replace a system that still has life in it.
Common Furnace Repair Problems We See in Azle Homes
- Cracked plenum seals from slab micro-shifts. The 2013 – 2015 earthquake swarm left lasting foundation movement in older Azle neighborhoods. Our techs pull and pressure-test every flex duct connection during service calls near Main Street and Boyd Road, because hairline separations at duct collars only appear under airflow testing.
- Short cycling from undersized ductwork. The 1950s – 1980s ranch homes in Azle’s core often have original ductwork too small for modern furnace airflow. The furnace overheats, trips the high-limit switch, and cracks the heat exchanger over time.
- Freeze-damaged line sets from Winter Storm Uri. Emergency replacements done in haste during February 2021 used whatever components were available. We’re now seeing those mismatched heat pumps and line sets fail from improper refrigerant charge and oil migration.
- Humidity-corroded control boards. Eagle Mountain Lake’s localized humidity accelerates corrosion on furnace control boards and flame sensors compared to drier inland suburbs. We clean or replace these components before they cause no-heat calls.
Pricing for Furnace Repair in Azle, TX
We believe you should know what furnace repair costs before you call. Here’s what we see in the Azle market:
| Service | Typical Range in Azle |
|---|---|
| Furnace Repair | $150 – $700 |
| AC Repair | $150 – $650 |
| Tune-Up | $80 – $200 |
A failed ignitor or flame sensor replacement usually lands at the lower end, around $150 – $250. Blower motor or gas valve replacement runs $400 – $700 depending on the brand and accessibility. Heat exchanger repair or replacement can exceed this range and often triggers a replace-or-repair conversation. We give you a written, fixed price before any work starts. Estimates are free. Call (984) 538-9003.
We Also Serve Cities Near Azle
Our Azle coverage extends to Newark, Springtown, Haslet, and Aledo. If you’re on a rural property between these towns with propane heat or a long driveway off a county road, we still dispatch with the same Threshold Verified technician introduction and written upfront pricing.
Serving Azle, TX - Our Local Coverage Area
We’re based in the Azle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Azle
Yes, slab micro-shifts from the 2013 – 2015 earthquake swarm can crack plenum seals and loosen gas connections, causing incomplete combustion and soot deposition. Our techs test static pressure and combustion at every service call in older Azle neighborhoods to catch this exact failure pattern. Call (984) 538-9003 for a free inspection.
We don’t recommend a size without a load calculation. Exposed properties with no wind shelter lose heat faster, and we account for that in our written Manual J calculation along with your actual ductwork and insulation. Oversizing causes short cycling; undersizing leaves you cold on the worst nights.
We service both. Our technicians repair gas and electric boilers, circulator pumps, zone valves, and radiant systems throughout Azle. We carry common boiler parts and perform combustion safety testing on every call.
It could be a failing capacitor, but it could also be a seized blower motor, dirty filter causing high amp draw, or undersized ductwork from the fast-growth years when inspectors were stretched thin. We test amp draw, capacitor microfarads, and static pressure to identify the actual cause rather than guessing.
Schedule annual maintenance, not repair, every fall before heating season. Because of Azle’s unique slab-movement history, we inspect plenum seals and gas connections as part of every tune-up. Catching a loose connection during maintenance prevents a no-heat call or safety hazard mid-winter.
Written by Devin Marlowe, Owner at Brandt HVAC, serving Azle and surrounding communities.







Before
After
Before
After
Before
After