Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Hudson
Furnace repair in Hudson typically runs $150 – $700 and most calls are completed same-day when you reach us early. We’re Brandt HVAC, and our Furnace Repair team serves Hudson from our Miami-area dispatch office, with crews already running calls in Pasco County. If your heat is out, call (984) 538-9003 now. A live person answers, 24/7. No voicemail, no callback queue.
Hudson’s mix of housing ages makes furnace work here genuinely different from neighboring towns. The pre-WWII mill cottages and triple-deckers near downtown still run original steam and gravity hot-water systems that most suburban HVAC techs rarely touch. Out in the mid-century ranch subdivisions off Little Road and Ridge Road, we see cracked heat exchangers and blower failures from decades of undersized returns. We know both worlds. That’s why Hudson homeowners call us back.
Why Brandt HVAC Is Hudson’s Preferred Furnace Repair Company
We’ve built our reputation in Hudson on showing up when we say we will and telling you exactly who is walking through your door. Every Brandt technician is background-checked and identity-verified under our Threshold Verified standard. You’ll get a name, photo, and badge confirmation before anyone arrives. If someone shows up who you weren’t expecting, that visit is on us.
Our 365-Day Done Right Promise means every repair carries a written guarantee. If it fails, we return at no charge. No argument. We also give you a written price before any work starts, on every single job. No exceptions. Hudson homeowners tell us this matters, especially when they’re home alone or have young children.
Phones are answered by a live person 24 hours a day, 7 days a week. Nights, weekends, holidays. When your furnace quits on a January night and Hudson’s inland temperatures drop into the 30s or below, you need a human who can dispatch help, not a recording telling you to call back Monday.
Boiler Repair in Hudson
Boiler Repair in Hudson is not the same job it is in newer suburbs. Our downtown calls regularly involve one-pipe steam systems installed in the 1910s – 1930s for shoe-factory workers, many still running original piping that has never been properly balanced. These systems fail from sagging returns that hold water and bang, clogged radiator vents that leave rooms cold, and low-water cutoffs that have aged past reliability. We repair these systems where other contractors push full replacement.
One-Pipe Steam Balancing
Properly pitching the return line and setting radiator vents on a one-pipe steam system takes patience and experience most suburban crews lack. We measure, adjust, and test until steam reaches every floor evenly. This work typically falls in our standard $150 – $700 repair range.
Gravity Hot-Water Conversions
Some Hudson homeowners want to move from gravity hot-water to forced hot-water with a circulator pump. We handle the conversion, but we’ll also tell you honestly when the existing boiler and piping have enough life left that a simpler repair makes more sense.
Gas Furnace Repair in Hudson
Gas Furnace Repair in Hudson covers everything from failed ignitors on 1990s units in the Beacon Woods area to cracked heat exchangers on mid-century ranches near Elfers Road. We service all major brands including Rheem, York, and Bryant, and stock common parts so you’re not waiting on a delivery.
Heat Exchanger Safety Checks
A cracked heat exchanger can leak carbon monoxide into your home. We inspect with visual tools and combustion analyzers. If we find a crack, we show you. Replacement heat exchangers run toward the upper end of our $150 – $700 range; full furnace replacement requires a separate load calculation and written quote.
Ignitor and Gas Valve Replacement
Hot-surface ignitors fail every few years in Hudson’s heating season. Gas valves stick from sediment. Both are straightforward repairs, usually completed in under two hours with parts we carry.
Trusted Brands We Service in Hudson
We repair Rheem, York, Daikin, Bryant, and every other major residential furnace and boiler brand in Hudson. Our trucks carry common ignitors, blower motors, gas valves, and control boards for faster same-day completion. For older steam boiler parts, we source through Worcester County suppliers who still stock cast-iron fittings and radiator vents that big-box stores don’t carry. That local parts network saves Hudson homeowners days of waiting.
Common Furnace Repair Problems We See in Hudson Homes
- Failed low-water cutoffs on original steam boilers. Our tech answered a no-heat call on a triple-decker off Main Street near downtown Hudson where the original one-pipe steam boiler had a failed low-water cutoff and a sagging return that was holding water and banging. We re-pitched the return, replaced the cutoff, and reset the radiator vents, but the bigger fix was a static pressure check that showed the 1920s balloon-frame cavities couldn’t support the forced-air retrofit the owner was considering without a full load calculation and new duct runs. We got the steam system running quietly for the season instead of selling a swap that would have disappointed.
- Cracked heat exchangers from years of undersized returns. In Hudson’s mid-century ranches, builders often spec’d return ducts too small for the furnace. Static pressure climbs, airflow drops, and the heat exchanger overheats and cracks. We fix the exchanger if possible, but we’ll also tell you when the ductwork needs addressing to prevent the same failure twice.
- Clogged radiator vents in never-balanced steam systems. Downtown Hudson’s triple-deckers have vents that haven’t been touched in decades. Rooms on upper floors go cold while the boiler runs constantly. We clean, replace, and balance the venting so heat distributes properly.
- Electrical panels that can’t handle modern furnace loads. Pre-WWII mill cottages often have 60-amp service and fuse boxes. A modern variable-speed furnace needs more. We coordinate with licensed electricians in our network when panel upgrades are needed before heating work can proceed safely.
Pricing for Furnace Repair in Hudson, FL
| Service | Typical Range in Hudson |
|---|---|
| Furnace Repair | $150 – $700 |
| Boiler Repair | $150 – $700 |
| Tune-Up | $80 – $200 |
Most repairs fall in the $150 – $400 range. You hit the higher end when we replace a heat exchanger, a blower motor, or a boiler section. What drives cost: part availability for your specific brand and age, whether we can complete the job same-day, and whether we discover related issues like unsafe venting or inadequate electrical service. We give you a written, itemized price before any work begins. No exceptions. Estimates are free. Call (984) 538-9003.
We Also Serve Cities Near Hudson
Our Furnace Repair in Hudson crews also run calls in Port Richey, Spring Hill, New Port Richey, and Elfers. Same Threshold Verified standard, same written pricing, same live-answer phones. If you’re in western Pasco County and need heat, we’re already nearby.
Serving Hudson, FL - Our Local Coverage Area
We’re based in the Hudson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Hudson
No, not necessarily. Many of these systems can be repaired and balanced for safe, efficient operation. We re-pitch returns, replace failed low-water cutoffs, and set radiator vents properly. Replacement only makes sense when the boiler block is cracked or repair parts are no longer manufactured. Call (984) 538-9003 and we’ll inspect it honestly.
Because these homes lack ductwork, and their balloon-frame cavities and minimal basement clearance make retrofits fight the building itself. We’ve seen forced-air installs in Hudson mill cottages that create uneven temperatures, excessive noise, and pressure imbalances because the ducts were shoehorned in without proper design. A like-for-like swap without a full load calculation and custom duct plan usually disappoints. We assess the whole system before recommending any change.
Cracked heat exchangers and failed blower motors from years of undersized return ducts. The furnace runs hotter and harder than designed. We repair the immediate failure and evaluate whether the ductwork needs enlarging to prevent a repeat. Most of these repairs run $300 – $600.
Hudson sits roughly 25 miles inland from Boston and sees consistently lower winter design temperatures than the Route 128 belt. Single-digit lows are routine here, not exceptional. That means furnaces work harder, run longer cycles, and fail under load more often. We see more no-heat emergencies on the coldest nights because systems that were “getting by” finally give out.
We repair both. Brandt HVAC technicians are trained on forced-air gas furnaces, steam boilers, hot-water boilers, and the hybrid situations common in Hudson’s older housing. One call, one company, one written guarantee. Call (984) 538-9003 for a free estimate.
Written by Devin Marlowe, Owner at Brandt HVAC, serving Hudson and surrounding Pasco County communities.