Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Fast, Reliable Furnace Repair Across Katy
Furnace repair in Katy typically costs $150 – $700, and most calls are completed same day. Our Furnace Repair team is dispatched from our Houston office and already knows the roads, the subdivisions, and the exact equipment builders installed in your neighborhood.
We’re Brandt HVAC, and we’ve built our name on showing you exactly who walks through your door. Before any technician arrives in Katy, you get their name, photo, and background-check verification through our Threshold Verified standard. They show a photo ID badge at the door. If anyone shows up who you weren’t told to expect, that visit is on us. Period.
Katy sits on the flat Katy Prairie in the Gulf Coast subtropical zone, where relative humidity regularly stays between 70 – 90% even outside peak summer months. That latent load overwhelms undersized or single-stage systems and creates indoor air quality complaints that Houston proper’s older, denser housing stock handles differently. For furnace repair, this means we’re often fixing systems that have been overworked by poor humidity control, or replacing components damaged by the extreme attic heat that builds in those unconditioned spaces above your second floor.
When your furnace goes out on a January night in Cinco Ranch or Firethorne, you need heat back fast. Call (984) 538-9003. A live person answers, 24 hours a day, 7 days a week. No voicemail, no callback queue.
Why Brandt HVAC Is Katy’s Preferred Furnace Repair Company
Katy homeowners choose us because we remove the uncertainty from home service. Every repair begins with a written price before any work starts. Every repair includes a written guarantee. And if that repair fails within 365 days, we return at no charge under our 365-Day Done Right Promise.
Our technicians are background-checked, uniformed, and introduced to you by name and photo before every visit. This matters in Katy’s master-planned communities, where families with young children and older homeowners often answer the door alone. You deserve to know exactly who you’re letting into your home.
We service all major residential HVAC brands: Goodman, Rheem, York, Daikin, Carrier, Trane, Lennox, Bryant, and American Standard. Parts for these systems are stocked locally, so most Katy repairs don’t wait on shipping.
Each Brandt HVAC location is independently owned and operated. Our Houston office coordinates dispatch and scheduling for Katy, with crews serving the area locally. You’ll never get a technician driving from three counties away who doesn’t know Katy’s subdivisions.
Emergency Furnace Repair in Katy
Emergency Furnace Repair in Katy means your heat is out when you need it, and you need a technician who can diagnose and fix the problem tonight. Most emergency calls in Katy involve no-heat situations during January cold snaps, often on original builder-grade furnaces that have finally reached their end-of-life after 15 – 20 years of service. We answer these calls with a live person, not a recording, and our typical response time to Katy neighborhoods is under two hours.
What Counts as an Emergency
A furnace that won’t ignite, a blower that won’t run, or a heat exchanger crack that triggers your carbon monoxide detector all demand immediate attention. We don’t charge overtime rates for after-hours calls. The price you see in writing is the price you pay.
How We Handle Night and Weekend Calls
Our on-call technicians carry common ignitors, gas valves, blower motors, and control boards for Goodman, Rheem, and York systems, the brands most frequently found in Katy’s tract homes. If we don’t have the part, we’ll tell you exactly when it will arrive and what temporary heating options you have.
Furnace Maintenance in Katy
Furnace Maintenance in Katy is not optional, it’s survival planning for equipment that lives in 140 – 155°F attic heat half the year. A tune-up runs $80 – $200 and includes a complete inspection, cleaning, and written report of what we found. We recommend scheduling before the first cold snap hits, because every other Katy homeowner with a 2005-vintage furnace has the same idea.
What Our Tune-Up Covers
We inspect the heat exchanger for cracks, test gas pressure and combustion, check blower amp draw, and measure temperature rise. In Katy’s attic-mounted systems, we pay special attention to capacitor health and control board connections, both of which degrade faster in extreme heat.
Why Attic Conditions Matter
Your furnace shares a cabinet with the air handler in an unconditioned attic that bakes all summer. That heat cooks blower motor windings and dries out capacitors long before winter arrives. Our maintenance plan catches these failures before they become emergency calls.
Trusted Brands We Service in Katy
We repair Goodman, Rheem, York, Daikin, and every other major residential brand. Goodman furnaces are especially common in Katy’s 1998 – 2015 build window, installed as builder-grade equipment in thousands of Cinco Ranch and Cross Creek Ranch homes. Rheem and York systems appear frequently in the post-Harvey replacement cycle. We stock parts for these brands locally, which means most Katy repairs don’t wait on a warehouse shipment. If your system is one of the rare exceptions, we’ll tell you upfront and give you a firm timeline.
Common Furnace Repair Problems We See in Katy Homes
- Heat exchanger cracks on original 80% single-stage furnaces. These units were sized by rule of thumb rather than load calculation, and after 15 – 20 years of expansion and contraction, the metal fails. We find this constantly in pre-2010 Katy builds.
- Failed blower motors and capacitors from attic heat exposure. Katy’s unconditioned attics reach 140 – 155°F in summer. That heat degrades electrical components fast, especially on systems that run cooling all summer then switch straight to heating.
- Limit switch trips from restricted airflow. Crushed flex duct runs, undersized returns, and high static pressure starve the furnace. We see this in large two-story homes where the original duct design never matched the load.
- Corroded control boards and connections in Harvey-era replacements. Systems that survived 2017 flooding or were replaced hastily afterward often show hidden oxidation. Our techs check contactor contacts and refrigerant line connections as standard practice on any pre-2018 unit in flood-zone subdivisions.
Pricing for Furnace Repair in Katy, TX
Most furnace repairs in Katy fall between $150 and $700, parts and labor included. A failed ignitor replacement typically runs $150 – $300. Blower motor repairs range $300 – $600. Heat exchanger work or gas valve replacement can reach the upper end of that range. We give you a written price before any work starts, every single time, with no exceptions.
| Service | Price Range |
|---|---|
| Furnace Repair | $150 – $700 |
| Tune-Up | $80 – $200 |
What drives cost up? Accessibility issues in tight attics, parts availability for obsolete systems, and the extent of secondary damage from a failed component. What doesn’t change? Our upfront pricing guarantee. You’ll never get a bill with charges you didn’t approve in writing.
Call (984) 538-9003 for a free estimate. We’ll diagnose your system and give you a firm price before any repair begins.
We Also Serve Cities Near Katy
Our Furnace Repair in Katy crews also handle calls in Fulshear, Richmond, Sugar Land, and Stafford. Dispatch is coordinated from our Houston office, with local technicians serving each area. Whether you’re in a Sugar Land master-planned community or a Richmond acreage property, the same Threshold Verified standard applies: name, photo, and background check before we ever knock.
Serving Katy, TX - Our Local Coverage Area
We’re based in the Katy area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Katy
Most 2005 builder-grade furnaces in Katy are at or past their reliable service life, and replacement often makes more sense than a third or fourth major repair. If your heat exchanger is cracked or your repair estimate exceeds $500 on a 20-year-old unit, we’ll show you the math on replacement, including any available rebates and financing. Call (984) 538-9003 and we’ll give you an honest assessment, no pressure.
Your limit switch trips because the furnace is overheating, almost always from restricted airflow. In Cinco Ranch’s large two-story homes, we find crushed flex duct runs, undersized returns, and high static pressure that starves the furnace. In Firethorne, our tech answered a no-heat call on a 2007 two-story where the original builder-grade Goodman furnace in the unconditioned attic had a cracked heat exchanger and a failed capacitor on the inducer motor. After the repair we checked static pressure across the evaporator coil and found the discharge air was fighting a crushed flex run to a second-floor zone. We sealed and re-routed the duct, verified the refrigerant charge on the paired condenser coil, and left the homeowner with a documented reason not to let this unit run another heating season.
Yes, especially for pre-2018 units in flood-zone subdivisions like Nottingham Country or older Cinco Ranch sections. Harvey floodwater left hidden corrosion in condenser units, disconnect boxes, and refrigerant line connections that slowly degrades electrical components. Our techs check for oxidized contactor contacts and corroded connections as a standard first step on any service call for a Harvey-era system. That corrosion can cause intermittent failures that are easy to misdiagnose if you don’t know to look for it.
Once a year, minimum, and we recommend fall before the first heating demand. Katy’s unconditioned attics hit 140 – 155°F in summer, which accelerates capacitor and blower motor degradation. Annual maintenance catches heat-stressed components before they fail on the coldest night of the year. A tune-up runs $80 – $200 and includes a written report of everything we found.
Yes, and we often do. Most Katy homes run dual systems, and our technicians are equipped to diagnose both the furnace and the paired condenser. If both need attention, we’ll prioritize the no-heat or no-cool emergency, then give you a written price for any additional work. One call, one visit, one written price for everything.
Ready to get your heat back? Call (984) 538-9003 now. A live person will answer, 24 hours a day, 7 days a week. We’ll send you a name and photo of your technician before they arrive, and you’ll get a written price before any work starts. That’s the Brandt HVAC way, and it’s how we’ve worked since 2003.
Written by Devin Marlowe, Owner at Brandt HVAC, serving Katy since 2003.







Before
After
Before
After
Before
After