Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Murphy
Furnace repair in Murphy typically runs $150 – $700 and most calls are handled same-day when you reach us before early afternoon. We’re the Furnace Repair team that knows Murphy’s 2000s-era subdivisions inside and out, and we dispatch from our Dallas-Fort Worth office with crews already rolling through Collin County. Call (984) 538-9003 any hour, day or night, and a live person picks up, no automated phone tree.
Murphy’s a unique market for heating work. This city went from roughly 2,500 people to over 17,000 during the 2000s building boom, which means the vast majority of homes here were built between 2000 and 2012 with the same builder-grade equipment. Now those furnaces are all hitting the 15-to-20-year wall at once. When your heat goes out on a January night in Maxwell Creek or along Murphy Road, you need someone who understands that your 2005 Lennox or Goodman isn’t failing alone, it’s part of a city-wide wave. We carry common parts for Trane, Lennox, Goodman, and Rheem systems on every truck, and our technicians are background-checked, photo-badged, and introduced by name and photo before they ever reach your door under our Threshold Verified standard.
Why Brandt HVAC Is Murphy’s Preferred Furnace Repair Company
We’ve built our reputation in Murphy on one thing: certainty. Every homeowner gets a written price before any work starts, every repair carries a written 365-Day Done Right Promise, and if anything fails within that year, we come back free of charge. No argument, no additional bill.
Our response time to Murphy neighborhoods like Ranch Estates, Maxwell Creek, and the subdivisions off FM 544 is typically under two hours for emergency calls placed during business hours. After hours, our 24/7 live answering means your call gets queued immediately to the on-call technician, not dumped to voicemail.
What separates us in Murphy specifically is that we know these houses. The slab-on-grade construction, the attic-mounted air handlers, the original ductwork that was never sealed properly during the boom build. A technician who treats your 2007 brick-veneer tract home like a custom build from Plano’s older estates is going to miss the real problem. We don’t miss it. Devin Marlowe, who leads our operation, insists our techs walk every Murphy attic with a static pressure gauge, because we’ve learned the hard way that the furnace is rarely the only thing failing.
Brandt comes from an old word for a firebrand, a fitting name for the work of keeping a home warm. Since 2003, as part of the Threshold Group family, we’ve served North Texas with independently owned locations that compete on who shows up and what they prove at your door, not on who can shout the loudest.
Heating Repair in Murphy
Heating Repair in Murphy covers everything from a dead ignitor on a cold morning to a cracked heat exchanger that’s pumping carbon monoxide into your living space. Most calls we run in Murphy involve the original builder-grade furnaces from the 2000s boom, systems that were adequate when installed but are now operating past their design life in homes that have settled, shifted, and developed duct leaks over twenty years. A typical heating repair in Murphy runs $150 – $700, with most falling in the $200 – $450 range for single-component failures like blower motors, gas valves, or ignitor replacements.
When the Blower Motor Quits
The blower motor is what pushes heated air through your ducts. In Murphy’s slab-on-grade homes with attic-mounted systems, these motors work harder than they should because original ductwork leaks create high static pressure. We test amp draw and bearing wear, and if the motor’s shot, we replace it with an exact-match OEM part, not a generic substitute that’ll fail faster.
Heat Exchanger Safety Checks
A cracked heat exchanger is the repair that can turn dangerous fast. Combustion gases, including carbon monoxide, can leak into your supply air. We inspect every heat exchanger with a borescope camera on any call where the homeowner reports headaches, nausea, or a sooty smell. If it’s cracked, we red-tag the unit and walk you through replacement options, no pressure to decide on the spot.
Boiler Repair in Murphy
Boiler Repair in Murphy is less common than furnace work, but the homes that have them, usually in the earlier 2000s builds or custom infill near Maxwell Creek, depend on them entirely. A failed circulating pump, a stuck zone valve, or a cracked expansion tank can leave you with no heat and potential water damage. Typical boiler repair in Murphy runs $150 – $700, similar to furnace work, though parts for older cast-iron systems can push toward the higher end if the manufacturer has discontinued components.
Circulating Pump and Zone Valve Failures
Boilers heat water, then pumps move that water through baseboards or radiators. When a pump seizes or a zone valve sticks, one part of your house goes cold while another stays warm. We test voltage at the pump, check for air-locked lines, and replace failed components with parts rated for your system’s operating pressure and temperature.
Expansion Tank and Pressure Relief Issues
The expansion tank absorbs pressure changes as water heats and cools. A waterlogged tank or a dripping pressure relief valve usually means the tank has failed or the system’s pressure is set wrong. Both can damage your boiler if ignored. We drain, test, and replace expansion tanks, then rebalance system pressure to manufacturer spec.
Trusted Brands We Service in Murphy
We service all major residential HVAC brands, and we stock common failure parts for Trane, Lennox, Goodman, and Rheem on every Murphy-bound truck. That inventory matters when your 2006 Trane XV80 blower motor dies on a Saturday night, or your Goodman GMH95 heat exchanger shows stress cracks at year eighteen. Because Murphy’s housing stock is so uniform, we know which parts fail on which systems at which age, and we plan our stock accordingly. Our Dallas-Fort Worth parts warehouse supports same-day or next-morning availability for anything not on the truck, which keeps most Murphy repairs to a single visit.
Common Furnace Repair Problems We See in Murphy Homes
- Builder-grade R-22 systems hitting end of life simultaneously. Murphy’s 2000s boom installed thousands of furnaces paired with R-22 air conditioners. Virgin R-22 was banned from production after January 2020, so recharge costs are now prohibitive. We’re constantly explaining to homeowners in Ranch Estates and along Murphy Road that their furnace may still fire, but the paired cooling system makes the whole package a replacement candidate.
- High static pressure from leaky original ductwork. The attic ductwork in these slab-on-grade tract homes was rarely sealed to modern standards. Leaks create suction that strains blower motors and can crack heat exchangers from overheating. We measure static pressure on every call, and if it’s above 0.5 inches WC, we flag the ductwork as part of the real problem.
- Single-zone systems fighting unbalanced floor plans. Most Murphy 2000s homes have one thermostat for two stories. The upstairs overheats, the downstairs never gets warm, and homeowners blame the furnace. The equipment is often sized correctly, the distribution is wrong. We address this with zoning or duct modification, not just a bigger furnace.
- North-facing refrigerant lines and heat pumps overwhelmed by ice storms. Murphy gets periodic ice storms, not steady snow, and that cycling freeze-thaw damages exposed copper. Heat pumps ice up, defrost controls fail, and backup electric heat strips draw massive amperage. Older electrical panels in these homes can’t always handle that load, which brings us to the breaker trips.
Pricing for Furnace Repair in Murphy, TX
We believe you should know what furnace repair costs in Murphy before you call, not after a technician is standing in your living room. Here’s what we charge:
| Service | Price Range in Murphy |
|---|---|
| Furnace Repair | $150 – $700 |
| Heating Repair | $150 – $700 |
| Boiler Repair | $150 – $700 |
| Tune-Up | $80 – $200 |
What drives cost? The part that failed, whether we can access it without pulling the furnace from the attic, and whether your system needs refrigerant work or electrical upgrades alongside the heating repair. A simple ignitor swap on a readily accessible Goodman might run $180. A heat exchanger replacement on a Lennox in a tight attic, with duct modification to fix static pressure, pushes toward $650 – $700. Every repair starts with a written, itemized price before any work begins. No exceptions. Estimates are free, and there’s no charge if you decline the work after seeing the price.
In the Ranch Estates subdivision off Murphy Road, we pulled a 2004 Goodman attic-mounted furnace and found the original builder-grade ductwork riddled with leaks, static pressure was off the charts, starving the blower motor. The R-22 condenser had already been quoted for recharge at a price the homeowner balked at, so we walked them through a SEER2 replacement and re-sealed the duct trunk before the new equipment went in. That’s the typical Murphy call: the furnace isn’t failing in isolation, the whole 2000s-era system is at end of life at once.
We Also Serve Cities Near Murphy
Our crews roll throughout the Dallas-Fort Worth metroplex, and we regularly run Furnace Repair in Murphy calls alongside work in Dallas, Fort Worth, Houston, and San Antonio. Each Brandt HVAC location is independently owned and operated, so your Murphy dispatcher knows Collin County traffic patterns and permitting, not some centralized call center reading from a script.
Serving Murphy, TX - Our Local Coverage Area
We’re based in the Murphy area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Murphy
A 2005 furnace can often be repaired if the heat exchanger is intact and parts are still available. Most Goodman and Lennox systems from that era have replacement blowers, ignitors, and gas valves in current stock. However, we also check the paired air conditioner, because if it’s an R-22 unit, a furnace repair may only buy you a year before the cooling side forces a full system change. Call (984) 538-9003 and we’ll inspect both, with a written price for either path.
The breaker trips because your furnace or its backup heat strips are drawing more amperage than the circuit can handle. In Murphy’s 2000s homes, original electrical panels were sized for the loads of that era, not for modern high-efficiency equipment with larger blower motors or electric heat backup. We measure actual amp draw against your panel rating, and if the panel needs upgrading before a new furnace can be installed safely, we tell you upfront and coordinate with a licensed electrician. Call (984) 538-9003 for a diagnostic.
Yes, absolutely. Murphy’s uniform housing stock means builders often installed identical furnaces across entire subdivisions, but those original load calculations were frequently rushed or used rule-of-thumb sizing. Your home may have added insulation, replaced windows, or settled differently than the house next door. We run a Manual J load calculation on every Murphy replacement to avoid the common problem of an oversized furnace that short-cycles, wastes gas, and dies early. Call (984) 538-9003 to schedule.
Ice storms damage Murphy HVAC systems differently than steady cold. The freeze-thaw cycle cracks exposed refrigerant lines on north-facing walls, and ice buildup on outdoor coils forces heat pumps into constant defrost mode, which switches on backup electric heat. That backup heat draws 3 – 5 times the power of normal operation and can overwhelm older electrical panels. Pure-cold-climate heat pumps aren’t designed for this cycling, and pure-hot-climate systems lack the defrost robustness. We see this pattern repeatedly in Maxwell Creek and Ranch Estates. Call (984) 538-9003 if your system’s struggling after ice.
SEER2 is the updated efficiency rating that went into effect in 2023, using a stricter test procedure that better reflects real-world conditions like ductwork resistance and blower motor power. The number will look lower than the old SEER rating for the same equipment, a 16 SEER unit might be 15.2 SEER2, but the actual efficiency hasn’t changed, only the testing has. For Murphy homeowners replacing a 2000s system, what matters is that new equipment must meet SEER2 minimums, and the paired furnace blower affects the overall rating. We explain exactly what you’re getting and why, with written specs, before you sign. Call (984) 538-9003 for a replacement quote.
Ready to get your heat back? Call Brandt HVAC at (984) 538-9003 for a free estimate. A live person answers 24 hours a day, 7 days a week, and we’ll send you your technician’s name, photo, and badge verification before they arrive at your Murphy home.
Written by Devin Marlowe, Owner at Brandt HVAC, serving Murphy and the Dallas-Fort Worth area.