Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Selma
Most furnace repairs in Selma run $150 – $700 and are completed in a single visit. Our Furnace Repair team dispatches from our San Antonio scheduling office with technicians already routed through the Selma area, so we typically arrive within hours, not days. Call (984) 538-9003 and a live person answers – 24 hours a day, every day.
We know Selma’s housing stock inside out. The modest single-family homes built between the 1950s and 1980s for agricultural worker families weren’t designed with central heat in mind. Furnace retrofits went into tight closets, cramped attics, and shoehorned mechanical rooms. That restricted access means repairs take longer if your tech isn’t prepared for it. Our technicians carry the right tools and parts for these tight installations, and we send you a name, photo, and background-check confirmation before anyone walks through your door. That’s the Threshold Verified standard.
Brandt comes from an old word for a firebrand – literally, the tool used to carry fire from place to place. Keeping Selma homes warm is what the name was built for.
Why Brandt HVAC Is Selma’s Preferred Furnace Repair Company
We’ve earned our reputation in Selma by showing up exactly as promised and fixing what others miss. The seasonal furnace failures here follow a pattern tied to the grape harvest that out-of-town contractors simply don’t recognize. When a technician from Fresno or Visalia treats your flame sensor like a generic part swap, they miss the sulfurous coating that’ll clog it again in weeks.
Our response time to Selma neighborhoods – Sunnyside, the Floral Avenue corridor, and the older tracts near downtown – is built into our dispatch system. We don’t overpromise. If you’re in Selma and your furnace is out, we tell you exactly when a technician will arrive, send their photo and badge number, and stick to that window.
Every repair starts with a written price. No exceptions. You’ll see the full cost before we touch a wrench. Every repair also carries our written 365-Day Done Right Promise – if the fix fails, we return at no charge. No argument, no additional fee.
Furnace Tune Up in Selma
A Furnace Tune Up in Selma costs $80 – $200 and should happen every fall, ideally before the first cold snap and definitely after the raisin harvest dust settles. We inspect burners, flame sensors, heat exchangers, and blower motors; test gas pressure and static pressure; and check for the sulfurous film that harvest season deposits on every exposed surface. In Selma’s 1950s – 1980s housing stock with retrofit ductwork, we also verify that your blower motor isn’t fighting against undersized or leaky ducts in unconditioned attic spaces.
What Our Tune-Up Covers
We clean and inspect the burner assembly, test ignition sequence, measure temperature rise, and check for carbon monoxide leaks. In Selma specifically, we pull and inspect the flame sensor – the single most common harvest-season failure point. We also evaluate your filter fit; many older Selma homes have non-standard return openings that let bypass air carry dust straight to the furnace.
When to Schedule
October is ideal. The harvest dust has settled, nights are cooling, and we can catch corrosion from summer Tule fog before it worsens in winter saturation. Waiting until your furnace fails on a cold January morning means an emergency call and a house full of cold air.
Emergency Furnace Repair in Selma
Emergency Furnace Repair in Selma costs $150 – $700, the same range as standard repair, because we don’t charge extra for nights, weekends, or holidays. A failed furnace in Selma isn’t just uncomfortable – winter Tule fog keeps temperatures low and humidity high, making a cold home genuinely unpleasant for older residents and families with young children. When you call (984) 538-9003, a live person answers, verifies your address, and dispatches the nearest available technician with your name, photo, and ETA.
What Counts as an Emergency
No heat at all. A furnace that cycles on and off rapidly without reaching temperature. The smell of gas or burning. A carbon monoxide detector alarm. Any of these means you should call immediately. For suspected gas leaks, evacuate first, then call us from outside.
How We Prepare for Selma’s Common Emergency Failures
Our trucks stock flame sensors, ignitors, blower motors, and gas valves for Goodman, Rheem, and York systems – the brands we see most in Selma’s older housing. We also carry portable HEPA vacuums and coil cleaner for harvest-season cleanouts that can’t wait. If your heat exchanger is compromised, we’ll show you the crack with a borescope camera and explain your options without pressure.
Trusted Brands We Service in Selma
We repair Goodman, Rheem, York, Daikin, and all major residential furnace brands in Selma. Our technicians carry common ignitors, flame sensors, blower motors, and gas valves on every truck, and we source less common parts through our San Antonio supply network with next-day availability for most items. Whether your furnace is a 1980s Rheem in a Sunnyside ranch or a newer Daikin mini-split heat pump in a tighter lot where ductwork wouldn’t fit, we have the parts knowledge and factory specs to fix it right. Every repair includes our written 365-Day Done Right Promise.
Common Furnace Repair Problems We See in Selma Homes
- Harvest-dust ignition failures. The sulfurous, sticky dust from Selma’s raisin drying yards coats furnace burners and flame sensors every August through September. Standard filter changes don’t catch it. By October, we’re replacing corroded flame sensors and cleaning burner orifices that won’t light reliably.
- Tule fog corrosion on venting and components. Weeks of near-saturated air in winter accelerate rust on heat exchangers, inducer motors, and exterior vent terminations. We inspect for corrosion damage that could lead to carbon monoxide risks.
- Blower motor overwork from leaky retrofit ductwork. Selma’s 1950s – 1980s ag-worker housing often has ductwork added later, run through unconditioned attics that hit 150°F in summer. Leaks and undersizing force the blower to run harder, tripping high-limit switches and burning out motors.
- Mini-split heat pump failures in tight lots. Where ductwork can’t be run, Selma homeowners use mini-split heat pumps. Extreme summer heat and winter fog cycling stress refrigerant charges and capacitors. We recover, weigh, and recharge to factory spec.
Pricing for Furnace Repair in Selma, TX
| Service | Price Range |
|---|---|
| Furnace Repair | $150 – $700 |
| Furnace Tune Up | $80 – $200 |
| Emergency Furnace Repair | $150 – $700 |
Most Selma furnace repairs fall in the $150 – $400 range for single-component fixes like ignitor or flame sensor replacement. Repairs reaching the higher end typically involve blower motor replacement, heat exchanger work, or multiple failed components in older systems. We give you a written price before any work starts – always, with no exceptions. That price includes parts, labor, and our 365-Day Done Right Promise. If we find additional issues during repair, we stop, explain, and get your approval before proceeding. Estimates are free. Call (984) 538-9003 to schedule.
We Also Serve Cities Near Selma
Our Furnace Repair in Selma coverage extends throughout the region, including Houston, San Antonio, Dallas, and Fort Worth. Each Brandt HVAC location is independently owned and operated with local technicians who know their markets. Scheduling and dispatch for the Selma area are coordinated from our San Antonio office.
Serving Selma, TX - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Selma
The sulfurous dust from grape drying yards coats your furnace’s burners, flame sensor, and heat exchanger with a sticky film that standard filters don’t catch. This causes intermittent ignition failures and short-cycling right as heating season begins. We clean these components and verify gas pressure during every fall tune-up. Call (984) 538-9003 to schedule before the cold hits – estimates are free.
Yes. Our technicians carry compact tools and flexible inspection cameras for the cramped mechanical closets and attic installations typical of Selma’s 1950s – 1980s housing stock. We also verify combustion air supply in tight spaces, which is critical for safe operation. Every tech is Threshold Verified with a photo ID badge shown at your door.
Prolonged winter fog keeps outdoor air near saturation for weeks, accelerating corrosion on furnace venting, heat exchangers, and inducer motors in systems with exterior components or poor drainage. We inspect for rust damage that could compromise safety or efficiency. Annual fall maintenance catches this before it becomes a mid-winter failure.
Flame sensor replacement and burner cleaning after harvest-season contamination. The sulfurous dust from drying yards corrodes sensors and clogs burner orifices, causing the furnace to light briefly then shut off. It’s a $150 – $300 repair in most cases, parts and labor included, and we guarantee it for 365 days.
Yes. Our phones are staffed by a live person 24 hours a day, 7 days a week – nights, weekends, and holidays. Emergency repair in Selma costs the same $150 – $700 range as standard service; we don’t charge overtime rates. Call (984) 538-9003 anytime and we’ll dispatch the nearest technician with your name, photo, and ETA.
Last October, we ran a furnace repair call in the Sunnyside area off Floral Avenue – a 1970s ranch home built for an agricultural worker family. The homeowner reported the furnace short-cycling, and our tech found a corroded flame sensor plus a heat exchanger coated with the same sticky film we see on evaporator coils after harvest. We cleaned the exchanger, replaced the sensor, and verified static pressure was within spec; the system has run clean through the winter.
In Selma, the fall raisin-harvest surge of sticky sulfurous dust from drying yards coats furnace burners, flame sensors, and heat exchangers right as heating season begins – a seasonal service pattern tied to the local grape belt that doesn’t exist in neighboring Fresno suburbs. If your furnace starts acting up in October or November, this is almost certainly why. A fall tune-up catches it before the first cold night.
Ready to get your Selma furnace fixed right? Call (984) 538-9003 now. A live person will answer, schedule your free estimate, and send you your technician’s name and photo before they arrive. Every repair comes with a written price upfront and our 365-Day Done Right Promise in writing.
Written by Devin Marlowe, Owner at Brandt HVAC, serving Selma and surrounding communities.