Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Solon
Most furnace repairs in Solon run $150 – $700 and our crews typically arrive within the hour for no-heat calls during the heating season. We dispatch from our Cleveland office and keep common Lennox, Trane, Carrier, and Goodman parts stocked for the subdivisions along SOM Center Road, Pettibone Road, and the streets around Solon Community Park.
We’re Brandt HVAC, and we know Solon’s homes. The city filled fast between 1985 and 2005, and those builder-installed furnaces are now hitting their end-of-life window together. When your heat goes out on a January night with lake-effect snow piling up, you need someone who understands why your 1990s furnace failed and how to fix it without selling you equipment you don’t need. Call (984) 538-9003. A live person answers, 24 hours a day.
Why Brandt HVAC Is Solon’s Preferred Furnace Repair Company
Our Furnace Repair team has worked the Signature of Solon, Solon Village, and the neighborhoods around Aurora Road long enough to know the shortcuts builders took in the 1990s. We’ve replaced blower motors in basements off Harper Road and tracked down cracked heat exchangers in the original homes near Solon High School. That local knowledge saves time on every call.
Every technician we send to Solon is background-checked and identity-verified through our Threshold Verified standard. You’ll get a name, photo, and badge number before anyone arrives. If the person at your door doesn’t match what we sent, that visit is on us.
We answer the phone with a live person, never an automated tree. Nights, weekends, holidays. When the temperature drops into the teens and your furnace quits, that matters.
Every repair starts with a written price you’ll see and approve before we touch a tool. Every repair also carries a written 365-Day Done Right Promise. If it fails, we come back free.
Furnace Tune Up in Solon
Furnace Tune Up in Solon is preventive maintenance designed for the long heating season this corner of Cuyahoga County demands. We clean burners, test gas pressure, check heat exchangers for cracks, measure static pressure, and verify thermostat calibration. For Solon’s 1988 – 1998 home cohort, this visit often reveals the duct and static-pressure problems that will eventually destroy the furnace. A tune-up runs $80 – $200.
What We Check in Older Systems
We pull the blower assembly and inspect the heat exchanger with a camera scope. In Solon’s 1990s subdivisions, we also measure return-air static pressure. Many of those homes were built with panned return chases too small for the oversized furnace the builder installed. Catching that early can add years to your equipment.
When to Schedule
Book before October. Solon’s heating season runs late and hard. A tune-up in September beats an emergency call in January. We also flag any electrical panel limitations that would block a future variable-speed upgrade.
Emergency Furnace Repair in Solon
Emergency Furnace Repair in Solon means no heat, a failed ignition system, a tripped rollout switch, or any condition where the furnace is unsafe to run. We treat these calls as urgent. Lake-effect cold snaps here can drop indoor temperatures fast, and pipes in finished basements are at risk. Emergency repair costs the same $150 – $700 range as standard repair. We do not charge overtime.
What Qualifies as Emergency
No heat at all. A burning smell from the supply registers. A carbon monoxide detector alarm. Any visible crack or hole in the heat exchanger. If you’re unsure, call (984) 538-9003 and we’ll walk you through it.
How Fast We Respond
We dispatch from Cleveland and typically reach Solon within an hour for true emergencies during business hours. After hours, our on-call tech rotates through the eastern suburbs. You’ll know who’s coming before they leave the shop.
Trusted Brands We Service in Solon
We repair Trane, Lennox, Goodman, and Rheem systems daily in Solon, and we stock common ignitors, blower motors, gas valves, and control boards for fast turnaround. The 1990s subdivisions here are full of original Carrier and Bryant builder units, and we carry those parts too. If your furnace is a Daikin, York, or American Standard, we service those as well. Our van inventory is built around what actually fails in this climate, not what a warehouse thinks might sell.
Common Furnace Repair Problems We See in Solon Homes
- Cracked heat exchangers from decades of high static pressure. Solon’s builder-grade furnaces ran for years against undersized return-air chases. That restriction forces the heat exchanger to cycle hotter than designed, fatiguing the metal. We inspect with a camera scope and won’t patch around a crack.
- Failed ignitors in original 1990s equipment. Hot-surface ignitors typically last 4 – 7 years, but the ones in Solon’s original furnaces are often original. A replacement runs $150 – $300, parts and labor included.
- Blower motors burned out from dirty wheels and restricted returns. The same undersized ductwork that kills heat exchangers also overworks blower motors. We replace the motor, then check whether the duct is the real problem.
- Short-cycling thermostats satisfying on the main floor while upstairs freezes. Single-zone systems in 3,000 – 5,000 sq ft homes with finished basements can’t balance that load. We explain the duct and zone options before quoting any equipment.
Pricing for Furnace Repair in Solon, OH
| Service | Price Range |
|---|---|
| Furnace Repair | $150 – $700 |
| Furnace Tune Up | $80 – $200 |
| Emergency Furnace Repair | $150 – $700 |
What drives cost? The part, the accessibility, and whether we find a root cause like duct restriction that needs correction. A simple ignitor swap on an open basement unit runs toward the low end. A blower motor replacement in a tight closet, or a heat exchanger crack that requires full system evaluation, runs higher. We give you a written price before any work starts. No exceptions. Estimates are free. Call (984) 538-9003.
The Real Problem in Solon’s 1990s Homes
Here’s what generic repair pages won’t tell you. Solon’s 1988 – 1998 builder cohort paired oversized single-stage furnaces with undersized return-air chases hidden behind drywall. The real constraint on a furnace replacement here is almost never the box. It’s the duct and static pressure the original build left behind.
In the Signature of Solon subdivision off SOM Center Road, our tech pulled a 1992 Carrier 100,000 BTU single-stage furnace that had been short-cycling for years against a panned return chase barely large enough for 800 CFM. A static pressure test read 0.92 in. w.c. on a system that should sit near 0.50. We opened and resized the return, verified the heat exchanger for fatigue cracks, and quoted a modulating Carrier paired to the corrected duct before the homeowner spent a dollar on tonnage they didn’t need.
A like-for-like swap sized off the old data plate inherits the same static pressure problem and the same cold bonus room. That’s why we run a Manual J load calculation and a static pressure test on every replacement. Solon’s high household incomes mean many homeowners here choose premium upgrades, variable-speed heat pumps, whole-home humidification, and multi-zone controls. But those systems need correct ductwork and adequate electrical service first. The original panels in these homes often can’t carry a modern variable-speed or heat pump circuit without an upgrade.
We fix the duct. Then we size the equipment. In that order.
We Also Serve Cities Near Solon
Our Furnace Repair in Solon crews also handle calls in Bedford, Chagrin Falls, Maple Heights, and Beachwood. Same Threshold Verified standard, same written pricing, same live-answer phones. Dispatch is coordinated from our Cleveland office.
Serving Solon, OH - Our Local Coverage Area
We’re based in the Solon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Solon
Repair it if the heat exchanger is sound and the duct static pressure is correct. Replace it if we find exchanger cracks, if the unit is oversized for the actual load, or if the return duct is so restricted that any new furnace will suffer the same fate. We test both before recommending. Call (984) 538-9003 for a free evaluation.
The most common cause in Solon is an undersized return-air chase forcing high static pressure, often hidden behind finished basement drywall. A tune-up cleans and adjusts the furnace but doesn’t change the duct. We measure static pressure during every service call to find this.
Yes, but often only after correcting the ductwork and upgrading the electrical panel. The 1985 – 2005 home stock here has original panels and restricted returns that modern equipment can’t tolerate. We evaluate all three systems – duct, electric, and equipment – before quoting.
Typically within an hour for emergency calls during business hours. Our on-call tech covers the eastern suburbs after hours. Lake-effect events strain every HVAC company in Cuyahoga County, but we don’t use voicemail or callback queues. A live person answers and dispatches.
No. The original was likely oversized. We run a Manual J load calculation for the actual heat loss of your home, then size to that number. Installing the same BTU rating repeats the short-cycling, the noise, and the uneven temperatures you’ve already lived with.
Written by Devin Marlowe, Owner at Brandt HVAC, serving Solon and the surrounding communities. Brandt comes from an old word for a firebrand – a fitting name for the work of keeping a home warm. Established in 2003 as part of the Threshold Group family of home-service companies.