Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterHow Much Does HVAC Cost in Fort Worth?
Most HVAC work in Fort Worth falls into four price buckets in 2026: AC repair runs $150 – $650, furnace repair runs $150 – $700, a seasonal tune-up runs $80 – $200, and a full AC installation runs $3,500 – $7,500. Those ranges cover parts and labor on the standard jobs we see across Tarrant County. The exact number depends on what failed, how old the system is, and how quickly you need it fixed.
We’re Brandt HVAC. Every job starts with a written price before any work begins, so you’ll see your number in writing before anyone touches your equipment. No surprises, no “we’ll figure it out when we’re done.” If you’d rather just get your own quote, call (984) 538-9003 and a live person will pick up, day or night.
Key Takeaways
- AC repair in Fort Worth: $150 – $650, most common jobs land near the middle.
- Furnace repair: $150 – $700, with igniters and control boards driving the higher end.
- AC installation: $3,500 – $7,500 depending on tonnage and ductwork condition.
- Every repair includes a written guarantee, and if it fails within 365 days we return at no charge under our Done Right Promise.
- Written price before work starts, on every job, no exceptions.
HVAC Cost Breakdown (2026)
These are the ranges we quote most often in Fort Worth. Parts and labor are included in every figure below.
| Service | Typical Fort Worth Price | What’s Usually Involved |
|---|---|---|
| AC repair | $150 – $650 | Diagnostics plus repair of capacitors, contactors, blower motors, or refrigerant issues |
| Furnace repair | $150 – $700 | Igniter, flame sensor, control board, or inducer motor replacement |
| AC installation (full system) | $3,500 – $7,500 | New condenser, coil, line set, and labor; ductwork work is extra |
| Seasonal tune-up | $80 – $200 | Coil cleaning, refrigerant check, capacitor test, filter change, full safety inspection |
| Refrigerant recharge | $150 – $650 | Refilling the fluid that moves heat out of your home; leaks must be found first |
| Capacitor replacement | $150 – $350 | One of the most common summer failures in Fort Worth |
| Blower motor replacement | $400 – $650 | Motor swap plus electrical check; often the cause of weak airflow |
| Thermostat replacement | $150 – $450 | Standard or smart thermostat, wired and tested |
What pushes a job toward the top of its range? Older equipment is the biggest factor. A 15-year-old condenser often needs a part that’s harder to source, and once we open it up we sometimes find a second problem that wasn’t visible on the first pass. Ductwork in older Fort Worth homes, especially the pier-and-beam houses in Ryan Place and Fairmount, is often undersized for a modern system, which adds cost on installation jobs. What keeps you at the lower end: catching the problem early, sticking with the system you have, and keeping up with tune-ups so small issues don’t compound.
One thing worth naming plainly: if a technician recommends a repair, we put the price in writing first. You see the number, you decide, and nothing starts until you say go. If you want to understand how that works before you call, our home page walks through what to expect.
What Affects HVAC Pricing in Fort Worth
Fort Worth isn’t a one-size-fits-all HVAC market. Here’s what moves the price here specifically.
- Fort Worth’s heat load. Summer afternoons routinely run above 100°F, and systems here work harder than they would in most of the country. That means compressors and capacitors fail sooner, and replacements cost more because the equipment is sized for real Texas heat.
- Age of the home. The older neighborhoods near TCU and the Near Southside have original ductwork and small returns. Bringing those up to modern standards adds labor and materials that a newer build in Alliance or North Fort Worth won’t need.
- System size and tonnage. A 2-ton system and a 5-ton system are different jobs at different price points. Oversizing is a real problem here; too much capacity short-cycles and wears out faster, so we size to the house, not to the sticker.
- Season and timing. A July AC failure during a heat advisory gets priority scheduling, but emergency calls cost more than a planned repair in October. Booking a tune-up in spring or fall is always cheaper than fixing a breakdown in August.
- Refrigerant type. Older R-22 systems cost more to service because the refrigerant is phased out and expensive. If your system uses R-22, we’ll tell you straight whether a recharge makes sense or whether you’re better off putting that money toward a replacement.
- Access and attic conditions. Fort Worth attics get brutally hot. A straightforward coil replacement is faster than one where the air handler is boxed in, and labor reflects that.
If you want the trade’s real words explained in plain language, we’re happy to do that on the phone. Refrigerant recharge, for example, just means refilling the fluid that moves heat out of your home, and it’s only worth doing once we’ve found and fixed the leak.
How to Save on HVAC
You don’t have to accept the first number you’re handed, and you don’t have to replace a system that still has life in it. A few things make a real difference.
- Get a tune-up before you need one. The $80 – $200 seasonal visit catches failing capacitors, dirty coils, and low refrigerant before they turn into a $650 repair on the hottest day of the year.
- Change your filter on schedule. A clogged filter restricts airflow and makes your blower motor work harder. It’s the cheapest maintenance you can do, and it’s free to check.
- Ask for the repair-vs-replace math. If a repair costs more than a third of what a new system would, and the unit is past 12 years, replacement usually wins over the next five years. We’ll show you both numbers.
- Get a written price before work starts. A verbal estimate invites drift. A written one holds everyone to the same number, and it’s how every job here runs.
- Call before it’s an emergency. Scheduled work is cheaper than after-hours emergency work. Call (984) 538-9003 and we’ll find you a slot that doesn’t carry emergency pricing.
We offer free estimates, so there’s no cost to getting a real number in hand. Every technician who comes to your door is background-checked and identity-verified under our Threshold Verified standard, sent to you by name and photo beforehand, and shows a photo ID badge at the door. If anyone arrives you weren’t told to expect, that visit is on us. The name Brandt comes from an old word for a firebrand, which fits the work of keeping a home warm, and the same idea runs through the name: we put a name and a face to the person at your door instead of sending a stranger.
FAQs – HVAC Cost
How much does AC repair cost in Fort Worth?
AC repair in Fort Worth runs $150 – $650, with most jobs landing in the middle of that range. Capacitor and contactor failures tend to sit near $150 – $350, while blower motor or refrigerant work climbs higher. Call (984) 538-9003 for a free estimate on your exact situation.
How much does furnace repair cost in Fort Worth?
Furnace repair in Fort Worth runs $150 – $700. Igniter and flame sensor replacements usually land toward the lower end, and control board or inducer motor failures push toward the top. Every repair includes a written guarantee, and if it fails within 365 days we come back at no charge. Call (984) 538-9003 for a written price before any work starts.
Is it cheaper to repair or replace my AC in Fort Worth?
Repair is usually cheaper if your system is under 12 years old and the fix costs less than a third of a new install, which runs $3,500 – $7,500 in Fort Worth. Past 12 years, or if the compressor has failed, replacement often costs less over the next five years. We’ll show you both numbers in writing so you can decide. Call (984) 538-9003 for a free estimate.
Can you come today?
Yes, same-day service is available for urgent AC and furnace repairs in Fort Worth, and phones are answered by a live person 24 hours a day, 7 days a week. That means nights, weekends, and holidays too. Call (984) 538-9003 and we’ll tell you the soonest arrival window.
How much does a tune-up cost, and is it worth it?
A tune-up in Fort Worth runs $80 – $200, and it’s the cheapest way to avoid a mid-summer breakdown. It covers coil cleaning, a refrigerant check, a capacitor test, a filter change, and a full safety inspection. Call (984) 538-9003 to schedule one before the heat arrives.
Who Comes to Your Door Matters
Price is one part of the decision, but it isn’t the whole thing. If you’re home alone, managing a household with young kids, or simply don’t like opening the door to someone you can’t identify, the person doing the work matters as much as the number on the invoice. That’s why every Brandt HVAC technician is background-checked and identity-verified under the Threshold Verified standard, introduced by name and photo before the visit, and badged at the door. Every location is independently owned and operated, part of the Threshold Group family established in 2003, and we service all major residential brands including Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard.
If we don’t get it right, we make it right. That’s the 365-Day Done Right Promise, written into every repair.
Call (984) 538-9003 for a free estimate on any HVAC work in Fort Worth. A live person answers, you’ll get a written price before anything starts, and you’ll know exactly who’s coming to your door.
Written by Devin Marlowe, Owner at Brandt HVAC. Pricing reflects the Fort Worth market as of 2026. Brandt HVAC offers free estimates – call (984) 538-9003.
What Our Customers Say
"Furnace ignitor went out on a cold morning. Part was on the truck, installed in thirty minutes."
- Alvin K."Annual tune-up on the furnace. He cleaned the burners, tested the heat exchanger, and told me what was fine and what to watch. No scare tactics."
- Lorraine E."Maintenance plan is simple and the tech showed me the readings, not just said it was fine."
- Maribel C.