Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterHVAC Company in Argyle, TX
Most HVAC calls we get from Argyle aren’t simple fixes. They’re troubleshooting challenges in 5,000-square-foot custom homes with propane furnaces, zoned systems, and ductwork that’s been stressed by Denton County’s shifting black clay soils. Our technicians arrive with the tools and training for exactly that kind of work. If your system is acting up, call us at (984) 538-9003 and we’ll send you a name, photo, and arrival time before anyone knocks.
Why Argyle Homes Are Different
Argyle sits in the southern Cross Timbers zone, where summer temperatures crack triple digits and the expansive clay soil swells and shrinks with every rain cycle. That soil movement is the hidden culprit behind a lot of “HVAC failures” we see here. In homes built during the 2010s construction boom, we’ve found slab-embedded ductwork joints pulled apart at the plenum, sending conditioned air into the ground instead of the living space. The homeowner thinks their AC is undersized; the real problem is a foundation-shift duct separation.
The housing stock amplifies everything. Argyle’s residential base runs heavily to newer custom and semi-custom builds, frequently 4,000 – 6,000 square feet with high ceilings and open plans that demand precise Manual J load calculations. Many parcels sit beyond natural gas mains, so propane-fueled systems are far more common than in neighboring Flower Mound or Denton proper. Our technicians size propane equipment differently, account for fuel-cost economics, and work with pressure regulators that natural-gas techs rarely handle.
Then there’s the freeze risk. Hard freezes, including Winter Storm Uri in February 2021, exposed how many attic-located air handlers and minimally insulated duct runs in fast-built subdivisions weren’t designed for sustained cold. We still find uninsulated flex duct in attics that should have been wrapped years ago.
Our Main Argyle Services
Here are the three services Argyle homeowners call us about most often. Each one has its own dedicated page with deeper detail on what to expect.
AC Repair in Argyle
AC repair in Argyle usually starts with a complaint about uneven cooling or a system that can’t keep up in July. We check the obvious first, but we also test static pressure and inspect slab ductwork for separations caused by soil shift. In the larger homes common here, we frequently find the real problem is a zoning damper failure or a variable-speed blower that’s lost its programming. Our technician will show you a written price before touching anything. AC Repair in Argyle covers what we fix most often and what it costs.
Furnace Repair in Argyle
Furnace repair in Argyle means working on more propane systems than you’ll find ten miles east. That means checking tank levels and regulator pressure, not just the burner assembly. We also see cracked heat exchangers in high-end units that were oversized for the load and short-cycled themselves to death. Every repair comes with our 365-Day Done Right Promise in writing. If you need details on common failures and pricing, see Furnace Repair in Argyle.
AC Maintenance in Argyle
AC maintenance in Argyle is preventive work on systems that work harder than their specs suggest, thanks to oversized square footage and Texas heat. Our tune-ups include refrigerant level checks, capacitor testing, and duct pressure tests that catch slab separations before they become emergency calls. We document everything in a written report, and our techs aren’t paid on what they upsell. Schedule details and what’s included are on AC Maintenance in Argyle.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Argyle
We repair and maintain Goodman, Rheem, York, Daikin, and every other major residential brand. Our trucks carry common capacitors, contactors, and igniters for Carrier, Trane, Lennox, Bryant, and American Standard systems too. Most repairs that don’t need a factory-ordered part are completed same day. See our brands for the full list.
Pricing for HVAC Company in Argyle, TX
| Service | Typical range in Argyle |
|---|---|
| AC Repair (minor: capacitor, contactor) | $150 – $350 |
| AC Repair (moderate: refrigerant leak, fan motor) | $350 – $500 |
| AC Repair (major: compressor, coil replacement) | $500 – $650 |
| Furnace Repair (minor: igniter, flame sensor) | $150 – $300 |
| Furnace Repair (moderate: blower motor, control board) | $300 – $500 |
| Furnace Repair (major: heat exchanger, gas valve) | $500 – $700 |
| AC Installation (new system) | $3,500 – $7,500 |
| Tune-Up / Maintenance visit | $80 – $200 |
Prices in Argyle run toward the higher end of these ranges when we’re working on multi-zone systems, accessing attic equipment in steep-roofed custom homes, or tracing duct separations that require camera inspection. You’ll always see a written price before we start, and that price doesn’t change unless you ask for additional work.
Neighborhoods We Serve in Argyle
We dispatch from our Dallas-Fort Worth office and typically reach Argyle addresses within 45 minutes during business hours, often faster for emergency calls. These are some of the areas we work in regularly:
- Harvest
- Liberty by the Lake
- Argyle Forest
- Saddlebrook
- Interlochen Estates
Service Area – Cities Near Argyle
Our crews work throughout northern Denton County and southern Denton County from the same dispatch base. If you’re just outside Argyle city limits, we also serve Flower Mound, TX, Roanoke, TX, Lake Dallas, TX, and Denton, TX with the same Threshold Verified standard and upfront pricing.
Serving Argyle, TX - Our Local Coverage Area
We’re based in the Argyle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Argyle, TX
We typically arrive within 45 minutes for emergency calls in Argyle during business hours, and our phones are answered by a live person 24 hours a day. After-hours emergency dispatch is available; call (984) 538-9003 and we’ll give you a real arrival window, not a callback promise.
Most Argyle HOAs require architectural review for outdoor unit placement, and Denton County enforces mechanical permits for system replacements. We handle permit paperwork as part of every installation quote, and we’ll flag any HOA notification requirements before we schedule.
In Argyle’s 10 – 15-year-old homes, uneven cooling often traces to duct joints that separated as the slab shifted on expansive clay soil. It’s a foundation issue masquerading as an HVAC problem, and it won’t be fixed by a bigger air conditioner. We test static pressure and inspect duct runs to find the real cause.
Ready to schedule? Call Brandt HVAC at (984) 538-9003 for a free estimate. We’ll send you the name and photo of your technician before they arrive, show a written price before any work starts, and back every repair with our 365-Day Done Right Promise in writing.
What happens when you call
- 1A real person answersNo phone trees - talk to a local hvac pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Argyle Customers Say
"Drain line was clogging and causing a leak by the air handler. They cleared it and installed a float switch so it can't flood again."
- Nora T."AC stopped cooling on a hot afternoon. Tech arrived with a badge, checked the capacitor, found it bad, and replaced it on the spot. House cooled down within the hour."
- Steve P."Furnace ignitor went out on a cold morning. Part was on the truck, installed in thirty minutes."
- Alvin K.