Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterLennox HVAC in Seattle, CA | Brandt HVAC
Lennox HVAC service in Seattle comes down to one reality: most homes here were never built for central air, so the work is almost always heat pumps and ductless mini-splits. Brandt HVAC provides independent Lennox repair, maintenance, and our AC Repair in Seattle across the city with a written price before any work starts and a live person answering the phone 24/7. We’re not manufacturer-affiliated, which means we answer to you, not a corporate warranty department. Call (984) 538-9003 for a free estimate on Lennox service anywhere in Seattle.
Why Seattle Residents Choose Us for Lennox Service
Devin Marlowe, our owner and lead technician, spent years on Los Angeles job sites before bringing that hands-on diagnostic approach to the Pacific Northwest. He trains our techs the way he was trained at LA Trade-Tech: learn the refrigeration cycle cold, then learn how each brand breaks differently. That matters for Lennox equipment because the brand leans hard on proprietary control boards and inverter logic that generic training doesn’t cover.
We’ve built our Seattle Lennox service around what actually fails here. That means stocking OEM-compatible control boards, capacitors rated for damp mechanical rooms, and condensate routing parts that hold up in pre-war basements. Every tech who walks through your Seattle door is background-checked, uniformed, and introduced to you by name and photo before arrival under the Threshold Verified standard. If someone shows up you weren’t told to expect, that visit is on us.
We also service every major residential brand including Carrier, Trane, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Lennox sales & service, though, we go deeper than a generalist shop, because Lennox’s Signature and Elite lineups demand it.
Common Lennox HVAC Problems We Solve in Seattle
- Inverter board failures on Signature and Elite heat pumps. Seattle’s grid has more voltage fluctuation than most homeowners realize, especially in older neighborhoods like Wallingford and West Seattle. Lennox SL25XPV and EL18XPV units use sensitive inverter boards that can fail after repeated voltage sags. We replace with OEM parts when the board drives the compressor, because aftermarket boards often can’t handle Lennox’s communication protocol.
- Outdoor coil corrosion from marine humidity. Persistent moisture in Seattle air, especially within a half-mile of Puget Sound, accelerates rust on outdoor coils. This leads to refrigerant leaks and reduced capacity on ML14XC1 and EL16XC1 units. We pressure-test, locate the leak, and replace the coil rather than just recharging, because a recharge without a leak fix is money thrown at a hole.
- iComfort thermostat communication errors. Lennox’s communicating thermostats are brilliant when they work, but damp mechanical rooms in Seattle basements corrode the low-voltage wiring over time. That corrosion breaks communication between the stat, the air handler, and the outdoor unit. We chase those faults with the same diagnostic tools Lennox dealers use, without you paying dealer markup.
- Condensate drain failures on ductless add-ons in pre-war homes. In Ballard and Capitol Hill, homes with original cast-iron radiators often get Lennox ductless units retrofitted into rooms with no logical drain path. Improper routing leads to winter overflow, water damage, and safety shutdowns. We reroute drains to grade and install overflow protection as standard practice.
- Short-cycling from oversizing. Three decades of “bigger is better” HVAC sales left Seattle with plenty of oversized Lennox furnaces and heat pumps. A furnace that fires for six minutes and shuts off is not working fine; it’s wearing itself out. We evaluate load, not square footage, before recommending any fix or replacement.
Lennox Service in Seattle: What Local Conditions Mean for Your Equipment
Seattle is one of the few large U.S. cities where the majority of homes were built with zero cooling infrastructure. The marine climate made air conditioning unnecessary for generations, so builders ran hydronic radiator systems and gas furnaces without a single inch of supply ductwork. That changed in June 2021, when the Pacific Northwest heat dome pushed Seattle to 108°F, shattering a record that had stood for over a century. Homeowners who had never thought about cooling suddenly needed it, and the housing stock handed them one answer: ductless. For Lennox owners, this creates a specific service reality. In Fremont or Queen Anne, we regularly walk into homes with a Lennox gas furnace that works fine and no distribution path for cooled air. The conversation is not “should we add central AC”; it’s “where do we place the indoor heads for a ML17XP1 or EL18XPV.” That’s a Seattle-specific conversation. In most U.S. cities, adding cooling means extending existing ducts. Here, it means starting from zero.
Lennox Models & Products We Service in Seattle
We service the full Lennox residential range: the Dave Lennox Signature Collection (SL28XCV, SL25XPV), the Elite Series (EL18XPV, EL16XC1), and the Merit Series (ML14XC1, ML17XP1), along with iComfort-enabled heat pumps and air handlers. For critical components like inverter boards and compressors, we use OEM Lennox parts. For commodity parts like capacitors and relays, we’ll install a quality aftermarket equivalent when it meets or exceeds spec and saves you money. We keep common Seattle failure parts in our local stock, so a January heat pump repair in Beacon Hill doesn’t wait on a distributor in Kent.
Lennox Service Pricing in Seattle
Here’s what Lennox service actually costs in Seattle. These are the ranges we quote, with a written price before any work starts:
| Service | Typical Range |
|---|---|
| Heat Pump Repair | $175 – $765 |
| Heat Pump Installation | $4130 – $8850 |
| Tune-Up | $95 – $235 |
Repair cost depends on the component: a capacitor is at the low end, an inverter board or compressor at the high end. Installation cost depends on the number of indoor heads and the electrical work involved. A free estimate from us includes a written breakdown so you know exactly what you’re paying for before we touch a screw. Call (984) 538-9003 for a free estimate, and we’ll get you that number.
Serving Seattle, WA - Our Local Coverage Area
We’re based in the Seattle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Lennox HVAC in Seattle
Short-cycling in Seattle is usually an oversized unit firing and shutting off quickly, a failing inverter board that can’t hold a run signal, or a corroded coil reducing capacity so the system overshoots. We diagnose the root cause, not the symptom. For a heat pump that’s short-cycling, call (984) 538-9003 for a diagnostic visit; our repair range is $175 – $765 and the written quote comes first.
Yes. This is the most common installation we do in Seattle’s pre-war neighborhoods like Ballard and Wallingford. A home with cast-iron radiators and no ductwork is an ideal candidate for a Lennox ML17XP1 or EL18XPV ductless system. We run refrigerant lines through closets or exterior chases, mount indoor heads where they’ll heat and cool each zone, and route condensate so winter humidity doesn’t back up into the house. Installation ranges from $4130 to $8850 depending on the number of heads.
Seattle’s persistent marine humidity accelerates corrosion on outdoor coils, especially for units near Puget Sound or exposed to prevailing west winds. Corroded coils develop pinhole refrigerant leaks and lose capacity. A tune-up, at $95 – $235, includes a coil inspection and cleaning that catches this early. Waiting until the system stops cooling means a coil replacement at the higher end of the repair range.
No, and neither should anyone else. A cracked heat exchanger is a carbon monoxide risk, and the correct repair is replacement. We’ll verify the crack, shut the system down if it’s dangerous, and quote you a replacement furnace through Seattle Furnace Repair plus any needed venting corrections. If the repair exceeds 40% of a new system’s installed price, we’ll tell you straight. Call (984) 538-9003 and we’ll walk you through the options.
Yes. Seattle City Light and Puget Sound Energy both run heat pump incentives, and Washington State’s energy code updates have made ductless heat pumps the default retrofit solution. We’ll handle the rebate paperwork for your Lennox installation so you don’t miss a dollar. For exact rebate amounts on your project, call (984) 538-9003 and we’ll check current program terms for your address.
Service Areas Near Seattle
We run Lennox service across Seattle and into the communities around it. If you’re outside the city proper, we cover nearby areas throughout the Puget Sound region. For Lennox owners further afield, we also offer Lennox service in Nashville-Davidson and Lennox service in Las Vegas. For everything within the metro, see our full Seattle service area.
Book Your Lennox Service in Seattle Today
Tell us what your Lennox system is doing, and we’ll give you a straight answer. Written price first, every time. Call (984) 538-9003 and a live person answers, day or night.
Written by Devin Marlowe, Owner at Brandt HVAC, serving Seattle since 2003.