Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Clarkston
Most furnace repairs in Clarkston run $150 – $700 and are completed in a single visit, with our Furnace Repair team dispatching from our Atlanta office to reach Clarkston homes the same day you call. We’re familiar with the specific heating systems in this area, from the 1970s-era Carrier and Goodman furnaces still running in complexes off Montreal Road to the first-generation replacement units struggling through undersized flex duct in attic spaces. When your heat goes out on a January night in Clarkston, you need a technician who understands why your system failed, not just how to swap a part. Call (984) 538-9003 and a live person will answer, 24 hours a day.
Why Brandt HVAC Is Clarkston’s Preferred Furnace Repair Company
We’ve built our reputation in Clarkston by showing up when we say we will and telling you exactly who is walking through your door. Every technician is background-checked and identity-verified through our Threshold Verified standard. You’ll receive a name, photo, and badge confirmation before arrival, and if anyone shows up who you weren’t told to expect, that visit is on us.
Our dispatch team coordinates from the Atlanta office, but our crews live and work in the Clarkston area. We know the difference between a furnace failure on Indian Creek Drive versus one on Rowland Road, and we carry the right parts for the Goodman, Rheem, and Carrier systems common in this market.
Reviews from Clarkston customers consistently mention our upfront pricing and the 365-Day Done Right Promise. Every repair includes a written guarantee, and if the same problem returns within a year, we come back at no charge.
Phones are answered by a live person, never a voicemail tree or callback queue. Nights, weekends, holidays, it doesn’t matter. Someone real picks up.
Gas Furnace Repair in Clarkston
Gas Furnace Repair in Clarkston addresses the specific failure patterns we see in this city’s 1960s – 1980s apartment stock: cracked heat exchangers on furnaces run near-continuously at high occupancy, failed ignitors on original equipment, and gas valves that stick after years of cycling. A typical gas furnace repair in Clarkston costs $150 – $700, parts and labor included. We start with combustion analysis and heat exchanger inspection, because in these older systems, a cracked exchanger is a safety issue that changes the entire scope of work.
Heat Exchanger and Combustion Safety
We inspect every gas furnace’s heat exchanger with a borescope camera before declaring it safe to operate. In Clarkston’s high-density units, we’ve found cracked exchangers on 1978 Carrier furnaces that cycled thousands of extra hours because returns were blocked and the system never reached setpoint. If we find cracks, we show you the image, explain why the furnace must be shut down, and give you a written replacement quote on the spot.
Ignitor and Gas Valve Replacement
Hot surface ignitors fail every 3 – 5 years in normal use, but in Clarkston’s constant-run conditions, we see 2-year lifespans. A new ignitor runs toward the lower end of our $150 – $700 range. Gas valves are less common failures, but when they stick or leak, we replace the entire valve assembly and test manifold pressure to factory spec.
Furnace Tune Up in Clarkston
Furnace Tune Up in Clarkston is preventive maintenance designed for systems that work harder than they were designed to. Most tune-ups here cost $80 – $200 and include a full combustion analysis, amp draw testing on the blower motor, static pressure measurement, and heat exchanger inspection. Given Clarkston’s housing stock, we pay special attention to airflow restrictions and return path blockages that force furnaces into overtime operation.
Static Pressure and Airflow Testing
We measure total external static pressure on every tune-up. Normal is 0.5 in. w.c.; we routinely see 0.8 – 0.9 in Clarkston’s crushed flex-duct attics. High static pressure burns out blower motors, cracks heat exchangers from overheating, and wastes 20 – 30% of your gas bill. We document the reading, show you the photo evidence, and recommend specific duct repairs if needed.
Electrical Connection and Capacitor Check
Weak capacitors cause hard starts that damage compressors and blower motors. We test microfarad output and replace anything below 90% of rating. In Clarkston’s older buildings with original electrical panels, we also verify the furnace’s amp draw against breaker capacity, flagging panels that need upgrade before they become a fire risk.
Trusted Brands We Service in Clarkston
We repair and maintain all major residential furnace brands, with particular depth on the Rheem, Goodman, and Bryant systems common in Clarkston’s apartment complexes. We stock ignitors, blower motors, gas valves, and control boards for these brands locally, which means most repairs don’t wait on parts. For York and Daikin systems, we can typically source components within 24 hours. Every repair begins with a written price before any work starts, and every part we install carries our 365-Day Done Right Promise.
Common Furnace Repair Problems We See in Clarkston Homes
- Cracked heat exchangers on 1970s – 80s furnaces run to failure. In Clarkston’s high-occupancy units, original furnaces that should cycle 4 – 6 times hourly instead run 45 minutes of every hour. The heat exchanger metal fatigues from thermal expansion, and cracks release carbon monoxide into the supply air. We condemn these units on the spot and provide written documentation for landlords or property managers.
- Short-cycling high-limit trips from blocked returns and crushed duct. A mattress against a return vent, a closet built over a grille, or flex duct flattened by decades of attic heat, these all raise static pressure until the furnace overheats and shuts itself off. The tenant feels cold air; the furnace is actually protecting itself. We find the restriction, document it with photos, and fix what we can during the same visit.
- Failed blower motors and weak capacitors tied to undersized electrical service. Many Clarkston buildings still have 100-amp panels never upgraded for modern HVAC loads. A replacement furnace with a higher-efficiency ECM blower can trip breakers or cook its own motor when the panel can’t deliver clean power. We test voltage under load and flag these issues before they cause a second failure.
- Dirty burners and flame sensors from years of deferred filter changes. When filters clog, air bypasses through gaps in the cabinet, carrying dust and lint directly to the burner compartment. Flame sensors coated in oxide can’t detect ignition, causing lockouts. We clean the assembly, test flame signal in microamps, and leave the tenant with the right filter size written on the housing.
Pricing for Furnace Repair in Clarkston, GA
We believe you should know what furnace repair costs before you invite anyone into your home. Here’s what we charge in the Clarkston market:
| Service | Price Range |
|---|---|
| Gas Furnace Repair | $150 – $700 |
| Furnace Tune Up | $80 – $200 |
Where your repair falls in that range depends on what’s wrong. A flame sensor cleaning and burner tune runs toward $150. A heat exchanger replacement or full blower motor assembly pushes the higher end. We diagnose first, give you a written price with every line item, and get your approval before touching a tool. No exceptions. Estimates are free, and there’s no charge if you choose not to proceed. Call (984) 538-9003 to schedule.
We Also Serve Cities Near Clarkston
Our Furnace Repair in Clarkston coverage extends to neighboring communities including Scottdale, Stone Mountain, Tucker, and Decatur. We carry the same Threshold Verified standard, upfront pricing, and 365-Day Done Right Promise to every home in the area.
Serving Clarkston, GA - Our Local Coverage Area
We’re based in the Clarkston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Clarkston
The high-limit switch trips when the furnace overheats, and in Clarkston’s 1960s – 80s buildings, the root cause is almost always airflow restriction, not a bad switch. Crushed flex duct in hot attics, blocked returns from furniture placement, or an undersized filter slot all raise static pressure until the heat exchanger can’t shed its heat. We were called to a 1974-built complex off Montreal Road where a Goodman furnace was tripping the high-limit switch every few minutes; a static pressure test showed 0.9 in. w.c. on a first-generation replacement system pushing through crushed flex duct in the attic. We pulled the blower motor, replaced the weak capacitor, sealed the return leak, and reset the heat exchanger inspection to confirm no cracking, the tenant’s family had no idea the return vent was blocked by a mattress. If your high-limit trips persist after a parts swap, call (984) 538-9003 for a full airflow diagnostic.
A 1980s furnace at the end of its design life in Clarkston’s high-occupancy housing is usually a replacement candidate, not a tune-up prospect. These units run at 65 – 70% efficiency versus 80 – 95% for modern equipment, and their heat exchangers are fatigued from decades of thermal cycling. We document cracks, CO readings, and combustion efficiency for tenants to share with landlords. If the landlord refuses replacement of a condemned unit, we provide written evidence you can use with DeKalb County housing authorities. Call (984) 538-9003 for an independent assessment.
Constant operation means your furnace can’t reach its setpoint, and in Clarkston’s older apartments, this usually traces to three local factors: blocked returns raising the effective heating load, single-zone thermostats fighting unbalanced floor plans with south-facing units overheating while north-facing units freeze, and furnaces undersized for current occupancy density. We measure actual airflow at each register, calculate the true load against equipment capacity, and show you whether the problem is fixable with duct repairs or requires rightsizing the system. Call (984) 538-9003 for a load calculation.
Yes, Goodman and Rheem are among our most frequently serviced brands in Clarkston, and we stock the most common failure parts for both. Goodman ignitors, Rheem blower motors, control boards for 1980s-era units, we carry them. Our technicians are trained on the specific quirks of these systems, including the draft inducer failures common to certain Rheem series and the pressure switch issues on Goodman 90% furnaces. Every repair includes our 365-Day Done Right Promise. Call (984) 538-9003 to confirm parts availability for your model.
Years without a filter change is absolutely a safety concern in Clarkston’s gas furnaces. Clogged filters collapse or bypass, allowing unfiltered air to carry dust and lint directly to the burner compartment, where it can foul flame sensors, dirty burners, and in extreme cases, create a fire risk at the heat exchanger. We see evaporator coils completely clogged with debris, blower wheels coated in grime that throws them out of balance, and heat exchangers caked with soot that masks cracks during visual inspection. We recommend a furnace tune-up with full combustion analysis and heat exchanger inspection before another heating season. Call (984) 538-9003 to schedule, estimates are free.
Brandt comes from an old word for a firebrand, a fitting name for the work of keeping a home warm. When your Clarkston furnace fails, you need more than a quick fix. You need someone who understands why these systems fail here, who proves their identity before they knock, and who puts the real price in writing before they start. That’s what we do.
Call (984) 538-9003 now for a free estimate on furnace repair in Clarkston. A live person will answer, 24 hours a day, 7 days a week.
Written by Devin Marlowe, Owner at Brandt HVAC, serving Clarkston and the greater Atlanta area.