Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Conyers
Most furnace repairs in Conyers run $150 – $700 and our technicians can usually diagnose the problem and present a written price the same day you call. We’re familiar with the heating systems in Conyers’s 1990s subdivisions, from Salem Road to Highway 138, and we know why a “simple” furnace call often reveals ductwork or electrical issues hiding underneath. If your heat pump is stuck in emergency heat or your blower won’t start, call (984) 538-9003. A live person answers, 24 hours a day.
Brandt HVAC serves Conyers from our Atlanta dispatch office, with crews running daily to Rockdale County. We don’t just swap parts. We measure static pressure, check refrigerant charge, and inspect attic duct runs because in Conyers’s older homes, the furnace is rarely the only thing failing.
Why Brandt HVAC Is Conyers’s Preferred Furnace Repair Company
We’ve built our reputation in Conyers by showing up with a name and a face, not a surprise. Every technician is background-checked and identity-verified through our Threshold Verified standard. You’ll get a text with their photo before they arrive, and they’ll show a photo ID badge at your door. If anyone shows up who you weren’t told to expect, that visit is on us.
Our phones are answered by a live person, 24/7. No voicemail, no callback queue, no automated phone trees. When your heat goes out on a January night in Conyers, you talk to a human who can dispatch a technician.
Every repair starts with a written price before any work begins. Every repair also includes a written guarantee under our 365-Day Done Right Promise. If the repair fails within that year, we return at no charge. No argument, no additional fee.
We know the local housing stock. The brick-front subdivisions off Salem Road, the ranch-style homes near Conyers’s historic district, the two-stories along Highway 138. We’ve worked on the Goodman and Rheem systems that builders installed by the hundreds in the 1990s. That local knowledge means faster diagnosis and repairs that actually last.
Heat Pump Repair in Conyers
Heat Pump Repair in Conyers often means fixing a system that’s been running on borrowed time since the Clinton administration. Most of these 25-to-35-year-old builder-grade units weren’t designed for the ice storms and 100°F heat indices that hit Rockdale County, and they’re frequently propped up by emergency heat strips that mask deeper problems. A typical Heat Pump Repair in Conyers costs $150 – $700, depending on whether we’re replacing a failed capacitor, correcting a refrigerant charge, or addressing the ductwork issues that are forcing your system to work overtime.
When Emergency Heat Won’t Shut Off
If your thermostat shows “auxiliary” or “emergency” heat and won’t switch back, the heat pump itself may have failed or frozen over. We see this constantly in Conyers after ice storms. The real fix isn’t just getting the heat back on, it’s finding out why the condenser coil froze and whether your backup heat strips are even sized properly for your home.
Refrigerant Charge and Leak Detection
Low refrigerant forces your heat pump to run longer cycles and lean harder on electric backup heat. We pressure-test the system, locate leaks, and recharge to manufacturer spec. In Conyers’s aging systems, we often find leaks at the indoor coil or line set connections that have vibrated loose over decades of operation.
Heating Repair in Conyers
Heating Repair in Conyers covers furnaces, heat pumps, and the hybrid systems that many local homes rely on through winter. A typical Heating Repair in Conyers costs $150 – $700. The job might be a straightforward ignitor replacement on a gas furnace, or it might involve tracing why a 1996 system short-cycles every ten minutes despite having “new” parts. We don’t guess. We test combustion, measure temperature rise, and check for carbon monoxide before we clear any repair.
Gas Valve and Ignitor Failures
A furnace that clicks but won’t fire usually has a failed hot-surface ignitor or a gas valve that isn’t opening. These are common repairs, but we also check what caused the failure. Restricted airflow from collapsed flex duct, which we find regularly in Conyers attics, can overheat and stress every component downstream.
Blower Motor and Heat Exchanger Work
A squealing or seized blower motor stops heat distribution cold. A cracked heat exchanger is more serious, it can leak carbon monoxide into your home. We inspect with a combustion analyzer and visual borescope. If we find a crack, we show you the image and explain your options plainly. No scare tactics, just facts.
Trusted Brands We Service in Conyers
We repair Goodman, Rheem, York, and Daikin systems regularly in Conyers, and we service all major residential HVAC brands including Carrier, Trane, Lennox, Bryant, and American Standard. Our trucks carry common ignitors, capacitors, and control boards for the Goodman and Rheem heat pumps that dominate Conyers’s 1990s subdivisions. When a part isn’t on the truck, our Atlanta office sources it fast, usually same-day or next-morning. We don’t make you wait three days for heat because we didn’t stock a 30-year-old contactor.
Common Furnace Repair Problems We See in Conyers Homes
- Weak capacitors failing on the first hard freeze. The 25-to-35-year-old builder-grade heat pumps in Conyers neighborhoods like those off Highway 138 have capacitors that degrade in Georgia’s brutal attic heat. When January temperatures drop, the weakened capacitor can’t start the compressor, and the system falls back to strip-heat-only operation. Your January power bill spikes, and you think the furnace is broken when it’s really a $200 part.
- Undersized return ducting driving static pressure through the roof. We regularly measure static pressure at 0.8 to 0.9 inches of water column in Salem Road corridor homes, nearly double what the blower motor was designed for. The furnace and heat exchanger labor under that load, shortening their lifespan even when the equipment itself has no manufacturing defect.
- Flex duct cooked to failure in 130°F attics. Georgia attic temperatures destroy the insulation and vapor barrier on flex duct runs over time. In Conyers’s slab-built homes, all that ductwork routes through unconditioned attic space. The “heating problem” is often 20% air loss before it ever reaches your vents, not a furnace failure at all.
- Emergency heat masking a refrigerant leak. Original builders installed minimal backup heat strips to save money. When an ice storm freezes the outdoor coil, those strips kick on and draw more amps than older electrical panels comfortably supply. The system appears to work, but it’s hiding a refrigerant charge issue that gets worse every season.
Pricing for Furnace Repair in Conyers, GA
| Service | Typical Range in Conyers |
|---|---|
| Furnace Repair | $150 – $700 |
| Heat Pump Repair | $150 – $700 |
| Heating Repair | $150 – $700 |
What drives the cost? A failed ignitor or capacitor on a standard gas furnace or heat pump usually lands in the lower half of that range. If we find a cracked heat exchanger, a seized blower motor, or the ductwork and electrical issues common in Conyers’s older homes, the repair moves toward the higher end. We give you a written price before any work starts. You’ll know exactly what you’re paying and exactly what it covers. Estimates are free. Call (984) 538-9003 to schedule.
We Also Serve Cities Near Conyers
Our Furnace Repair crews run daily to Snellville, Redan, Oxford, and Lilburn from our Atlanta office. If you’re just outside Conyers city limits in Rockdale or neighboring counties, we still cover your area with the same response times and the same Threshold Verified technician standard. Schedule Furnace Repair in Conyers or any surrounding community.
Serving Conyers, GA - Our Local Coverage Area
We’re based in the Conyers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Conyers
It’s usually both. The original heat pumps in Conyers’s 1990s subdivisions were sized minimally and paired with undersized backup heat strips. When a weak capacitor or low refrigerant charge prevents the heat pump from running efficiently, the thermostat calls for emergency heat. We fix the immediate failure and check whether your backup heat is even adequate for your home’s load. Call (984) 538-9003 for a free diagnostic.
The problem is likely your ductwork, not your furnace. Homes in the Salem Road corridor were built with minimal return-air ducting and single-zone systems that can’t balance a two-story floor plan. We measure static pressure and often find it’s double the design spec. Sealing attic flex runs and adding return capacity fixes the room-to-room problem that a new furnace alone won’t solve.
Yes. We repair Carrier, Trane, Goodman, Rheem, York, Daikin, Lennox, Bryant, and American Standard systems throughout Conyers. Our trucks stock the most common failure parts for the Goodman and Rheem heat pumps that builders installed by the thousands during the 1990s building boom.
Usually not. A like-for-like swap drops new equipment onto ductwork that was undersized from day one, and onto an electrical panel that may not handle modern amp draws. We evaluate your whole system: static pressure, duct leakage, panel capacity, and load calculation. In Conyers’s 1990s homes, the best repair often includes duct modification and electrical upgrades alongside the equipment.
Replacement. A cracked heat exchanger cannot be safely repaired, and a 30-year-old furnace has exceeded its design lifespan. We show you the borescope image, explain the carbon monoxide risk, and give you a fixed price for a new system that includes proper duct evaluation and a load calculation. The 365-Day Done Right Promise covers our installation work, and we handle all rebate and financing paperwork.
At a brick-front two-story off Salem Road, our tech found a 1996 Bryant heat pump short-cycling in strip-heat mode after an ice storm had frozen the condenser coil; a failed capacitor and chronically low refrigerant charge had been masked for years by backup heat strips. We replaced the capacitor, corrected the charge, and measured static pressure at 0.9 in. w.c. against a return that was sized for roughly half the tonnage the house actually needed. After sealing the attic flex runs and adding a return, the system held temperature on a 32°F morning without leaning on emergency heat – a repair-plus-duct-fix that a like-for-like swap would have just hidden under a new cabinet.
Ready to get your heat fixed right? Call (984) 538-9003 now. A live person will answer, day or night, and we’ll send a Threshold Verified technician with a written price in hand. Every repair is backed by our 365-Day Done Right Promise: if it’s not done right, we make it right.
Written by Devin Marlowe, Owner at Brandt HVAC, serving Conyers and surrounding communities. Brandt comes from an old word for a firebrand – a fitting name for the work of keeping your home warm.