Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Fast, Reliable Furnace Repair Across Highlands
Most furnace repairs in Highlands run between $150 and $700, and our technicians can typically be there the same day you call. When your heat goes out on a January night and the humidity off the San Jacinto River is creeping through every crack, you need someone who knows this specific pocket of eastern Harris County, not a dispatcher reading from a map.
We dispatch from our Houston office, but our crews live and work in this corridor. They know the difference between a pier-and-beam home off Main Street and a low-slab ranch near the river, and they know which ones took water during Harvey. That matters when we’re diagnosing why your Goodman or Rheem furnace keeps cycling off, or why the blower motor sounds like it’s struggling against ductwork that hasn’t been right since the flood. Call us at (984) 538-9003 and a live person will answer, 24 hours a day.
Why Brandt HVAC Is Highlands’s Preferred Furnace Repair Company
We’ve earned our reputation in Highlands one verified visit at a time. Our Furnace Repair team arrives when expected, with a photo and name sent to your phone beforehand through our Threshold Verified standard. Every technician is background-checked, uniformed, and badged. If someone shows up who you weren’t told to expect, that visit is free and we make it right.
Homeowners here tell us the same thing: after Harvey, they don’t trust easily. We get that. That’s why every repair starts with a written price before any work begins, and every repair carries a written guarantee under our 365-Day Done Right Promise. If the fix fails, we return at no charge. No argument.
Our response time to Highlands neighborhoods typically runs under two hours for emergency calls. We know which streets flood first when the San Jacinto rises, and we plan routes accordingly. That local knowledge means we don’t waste time getting to you.
Furnace Tune Up in Highlands
Furnace Tune Up in Highlands is preventive maintenance built around the realities of this river-plain climate, where ground-level humidity pushes higher than in upland Harris County suburbs and older duct systems still show damage from Harvey-era flooding. Most tune-ups run $80 – $200 and include a complete combustion analysis, heat exchanger inspection, blower amp draw test, and filter assessment. We recommend scheduling before the first cold snap hits, because once temperatures drop, our calendar fills with breakdown calls from homeowners who waited.
What We Inspect in Older Highlands Systems
Many Highlands homes were built between the 1940s and 1970s with original ductwork that’s deteriorated or undersized for modern equipment. During a tune-up, we measure static pressure and check for post-flood corrosion in air handlers sitting on pier-and-beam foundations. Catching a cracked heat exchanger early prevents carbon monoxide risk and a costlier mid-winter emergency call.
Humidity and Mold in Air Handlers
The persistent moisture in this floodplain drives aggressive mold growth in neglected blower compartments and evaporator cabinets. We clean and treat these areas during every tune-up, and we’ll show you what we found with photos. If your system sits in a crawl space that took water, we’ll check whether the unit pad and disconnect box are elevated to current standards.
Emergency Furnace Repair in Highlands
Emergency Furnace Repair in Highlands means responding to calls where the heat is completely out, the ignitor is clicking with no flame, or the blower has stopped moving air entirely. We treat these as genuine emergencies, especially for older homeowners and families with young children in this community where overnight lows can drop into the 30s with soaking humidity. Emergency repairs fall within our standard $150 – $700 range, and we never charge overtime rates for after-hours or weekend calls.
Same-Day Response, Verified Arrival
When you call (984) 538-9003, a live person answers. We send your technician’s name, photo, and ETA to your phone. You’ll know exactly who is walking through your door, and they’ll show a photo ID badge at the threshold. For many Highlands residents, especially those home alone, this certainty matters as much as the repair itself.
What Counts as a True Emergency
Complete heat loss, a gas odor near the furnace, or a carbon monoxide detector alarm all require immediate professional attention. Don’t attempt to relight a pilot or troubleshoot gas valves yourself. Our technicians carry combustion analyzers and gas leak detectors on every truck, and we’ll verify safe operation before we leave.
Trusted Brands We Service in Highlands
We repair Goodman, Rheem, and York systems daily in Highlands, and we stock common ignitors, blower motors, gas valves, and control boards for these brands locally. That means faster turnaround and fewer return trips. We also service Carrier, Trane, Lennox, Daikin, Bryant, and American Standard. Whether your furnace is a 15-year-old Goodman in a post-Harvey replacement home or a newer Rheem in a renovated ranch near the Ship Channel, our technicians have the parts knowledge and factory training to diagnose it correctly the first time.
Common Furnace Repair Problems We See in Highlands Homes
- Ignitor failure from repeated cycling. Highlands homes with poor insulation and single-pane windows force furnaces to cycle on and off constantly during cold snaps. That wear burns out hot-surface ignitors, especially in older Goodman units we see frequently in this market.
- Blower motor strain from undersized or damaged ductwork. Original ductwork in pre-1970s Highlands homes was never designed for modern airflow requirements. Restricted airflow overworks the blower motor and trips high-limit safety switches.
- Heat exchanger corrosion from flood exposure. Air handlers and furnace cabinets that took water during Harvey often developed internal rust that progresses slowly. We find cracked or compromised heat exchangers in these units during routine service calls, and we red-tag them immediately for safety.
- Gas valve and control board failure from voltage fluctuations. The petrochemical corridor’s industrial electrical load can create brief voltage spikes that damage sensitive furnace electronics. We see this more often in Highlands than in western Harris County suburbs.
Pricing for Furnace Repair in Highlands, TX
We believe you deserve to know what furnace repair costs before anyone touches your system. In Highlands, most repairs fall between $150 and $700, with simpler fixes like ignitor replacements running $150 – $300 and more complex work like heat exchanger repair or blower motor replacement reaching the higher end. Every job starts with a written, itemized price. No work begins until you see it and agree.
Several factors push costs up or down here: the age of your system, whether original ductwork needs modification, and whether flood damage has compromised electrical components. Homes near the river with elevated equipment sometimes require longer refrigerant lines or modified venting, which we factor into the written estimate upfront. Call (984) 538-9003 for a free estimate with no obligation.
We Also Serve Cities Near Highlands
Our Furnace Repair in Highlands crews regularly travel to neighboring communities, including AC Maintenance in Highlands and AC Repair in Highlands customers in Channelview, Baytown, La Porte, and Deer Park. The same Threshold Verified standard, written pricing, and 365-Day Done Right Promise apply in every home we enter.
Serving Highlands, TX - Our Local Coverage Area
We’re based in the Highlands area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Highlands
We typically arrive within two hours for emergency calls in Highlands, and same-day scheduling is standard for non-emergency repairs. Our Houston dispatch office coordinates routes specifically for this eastern Harris County corridor, accounting for river crossing traffic and flood-prone access roads. Call (984) 538-9003 to check current availability.
We service all Highlands neighborhoods, from Main Street and the historic core to newer developments and rural properties along the San Jacinto River. Our technicians know the local road network and flood patterns, so we don’t waste time getting to you. Whether you’re in a pier-and-beam home near the old downtown or a low-slab ranch closer to the Ship Channel, we have the equipment and expertise for your system.
Yes, we provide emergency furnace repair in Highlands 24 hours a day, 7 days a week, including holidays, with no overtime charges. A live person answers every call, and we send your technician’s verified identity before arrival. If your heat goes out on a Saturday night or Christmas morning, you get the same written pricing and guarantee as a Tuesday afternoon call.
Pricing is consistent across our service area, including Highlands, Baytown, Channelview, La Porte, and Deer Park. The $150 – $700 range applies regardless of city. What affects your specific cost is the repair type, parts needed, and any flood-related modifications your system requires, not your zip code. We provide the same written, upfront estimate process everywhere we work.
Every furnace repair in Highlands includes a written 365-Day Done Right Promise. If the same component fails within that year, we return and fix it at no charge. No diagnostic fee, no labor charge, no argument. We also guarantee our workmanship for the full period, not just the part. Call (984) 538-9003 for your free estimate and written guarantee details.
Written by Devin Marlowe, Owner at Brandt HVAC, serving Highlands and eastern Harris County. Brandt comes from an old word for a firebrand – a fitting name for the work of keeping a home warm.







Before
After
Before
After
Before
After