Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Keller
Most furnace repairs in Keller run $150 – $700 and our technicians can usually diagnose the problem within an hour. We dispatch from our Dallas-Fort Worth office and carry the parts that fail most often on the systems found in Keller’s late-1990s and early-2000s subdivisions.
We’re Brandt HVAC, and we’ve spent years working in the two-story brick homes that dominate this city. We know the Carrier, Trane, and Goodman furnaces that volume builders installed in Heritage, Hidden Lakes, and the neighborhoods along Keller-Smithfield Road. We know which ones have cracked heat exchangers hiding behind blower motor failures, and we know that a single-return-air layout is often the real reason your upstairs bedrooms won’t warm up. When you call (984) 538-9003, a live person answers, 24 hours a day. We’ll send you our technician’s name, photo, and background-check verification before they arrive. That’s the Threshold Verified standard, and it’s how we work in every Keller home we enter.
Why Brandt HVAC Is Keller’s Preferred Furnace Repair Company
Keller homeowners aren’t looking for the cheapest technician. They’re looking for someone they can safely open the door to, who will explain what’s actually wrong, and who won’t start work until they’ve shown the price in writing. That’s what we built Brandt HVAC to deliver.
Our Furnace Repair team serves Keller from our Dallas-Fort Worth dispatch office, with crews who know the local housing stock. We’ve replaced blower motors in attic air handlers above 140°F August heat, diagnosed heat exchangers cracked after hard-freeze ice storms, and traced “no heat” calls to ductwork that builders never properly sealed in 2001.
Every repair comes with a written price before work starts and a written guarantee after it’s done. If the same part fails within 365 days, we return at no charge under our 365-Day Done Right Promise. No argument. No additional charge.
Our phones are staffed by live people, never voicemail trees, never callback queues. Nights, weekends, holidays. When your furnace quits on a 22°F January night in Keller, someone real answers at (984) 538-9003.
Emergency Furnace Repair in Keller
Emergency Furnace Repair in Keller means same-day response when your system fails during a hard freeze, a gas odor is present, or your home has vulnerable occupants and no safe heat source. We treat these calls as genuine emergencies because North Texas temperature crashes can drop indoor temperatures below safe levels within hours, and because a cracked heat exchanger can leak carbon monoxide into a home without any visible warning sign. Our live dispatchers answer (984) 538-9003 around the clock and route Keller calls to the nearest available technician who carries the parts most likely to fail on your system’s age and brand.
What Counts as a Furnace Emergency
No heat at all on a night below freezing. A carbon monoxide detector alarm. The smell of gas near the furnace. A burning electrical odor from the air handler. These situations need immediate professional attention, not a YouTube tutorial. Our technicians arrive with combustion analyzers, gas leak detectors, and the replacement ignitors, gas valves, and blower motors that Keller’s 20-year-old furnaces most commonly need.
Same-Day Response, Written Price on Arrival
Even in emergencies, we don’t start work until you’ve seen and approved a written price. The technician explains what they found, what it will cost, and what your options are. If the repair doesn’t make sense, we’ll tell you. We’ve walked away from jobs where replacement was the honest recommendation, and we’ll do the same in Keller.
Furnace Maintenance in Keller
Furnace Maintenance in Keller is preventive work designed for systems that run hard through both extremes of our North Texas climate, from January ice storms to 90-day stretches above 95°F that bake attic ductwork and stress blower motors year-round. A proper tune-up catches cracked heat exchangers before they leak CO, finds capacitors and contactors before they fail on the coldest night, and measures static pressure to spot duct degradation that forces your blower to work harder than it should. In Keller’s market, where most furnaces were installed during the 1995 – 2008 build boom and are now hitting end-of-life, maintenance often reveals whether you’re facing a $200 repair or whether honest math says it’s time to plan for replacement.
What Our Tune-Up Includes
We inspect the heat exchanger with a camera and combustion analyzer, test all safety controls, measure gas pressure and airflow, check electrical connections and capacitor tolerance, and inspect accessible ductwork for insulation collapse. You get a written report of what we found, with photos, and a flat price for any recommended work. Our technicians are not paid commission on what they sell. The tune-up costs $80 – $200 depending on system accessibility and whether you have one furnace or the dual systems common in Keller’s larger homes.
When to Schedule in Keller
September through November is ideal, before the first hard freeze. But we maintain furnaces year-round, and if you’re buying a home in Keller’s 76248 or 76262 zip codes, a pre-purchase furnace inspection can save you from inheriting a heat exchanger replacement the seller never disclosed.
Trusted Brands We Service in Keller
We repair Rheem, York, Daikin, Bryant, and every other major residential brand you’ll find in Keller’s subdivisions. Our trucks carry the ignitors, blower motors, gas valves, and control boards that fail most often on 15-to-25-year-old systems, and our Dallas-Fort Worth parts warehouse stocks heat exchangers and coils for same-day or next-day replacement when a repair isn’t the right call. We also work on the Carrier and Trane two-stage furnaces that builders favored in Heritage and Hidden Lakes during the early 2000s, and we understand the control-sequence quirks that send those systems into lockout when a $12 flame sensor gets coated with combustion residue.
Common Furnace Repair Problems We See in Keller Homes
- Cracked heat exchangers after hard-freeze events. Keller sits in North Texas’s hard-freeze corridor, where rapid temperature crashes stress 20-year-old builder-grade steel heat exchangers. The crack often follows years of thermal cycling, and it’s frequently masked by a failing blower motor or capacitor that quits at the same time.
- Single-return-air starvation on second floors. In 3,000 – 5,000 sq ft two-story homes built during Keller’s boom, builders spec’d one return per floor to cut costs. The result: upstairs bedrooms run 5 – 8°F colder than the thermostat in heating season, and homeowners blame the furnace when the real problem is duct design.
- Blower motor failure from attic heat degradation. August attic temperatures in Keller routinely exceed 140°F, collapsing flex-duct insulation and driving static pressure upward. The blower motor works harder, runs hotter, and fails prematurely, sometimes taking the control board with it.
- Refrigerant-side complications on heat pumps and dual-fuel systems. Ice storms can freeze outdoor coils, and many of Keller’s original heat pumps were charged with R-22 refrigerant, banned from domestic production in 2020. A “furnace” no-heat call sometimes becomes a heat-pump diagnostic where repair economics favor replacement.
Pricing for Furnace Repair in Keller, TX
We believe you should know what furnace repair costs in Keller before you call, not after a technician is standing in your living room.
| Service | Price Range in Keller |
|---|---|
| Furnace Repair | $150 – $700 |
| Tune-Up | $80 – $200 |
| AC Repair | $150 – $650 |
Most ignitor replacements run $150 – $300, parts and labor included. Blower motor replacements typically fall in the $400 – $700 range. Heat exchanger replacement, when it’s safe and economical to perform, can approach the upper end of our repair range or exceed it, which is why we’ll show you the math against replacement cost.
What moves a job toward the higher end: attic or closet installations with restricted service clearance (common in Keller’s production-builder homes), dual-fuel or two-stage systems requiring additional diagnostic time, and access issues where ductwork must be moved to reach the furnace. What doesn’t affect price: the neighborhood you live in, the time of day you call, or whether we think you can afford more. Every job gets a written price before work starts. Estimates are free. Call (984) 538-9003.
We Also Serve Cities Near Keller
Our Furnace Repair in Keller crews also respond to calls in Haslet, North Richland Hills, Roanoke, and Southlake. The same Threshold Verified standard, same written pricing, same live-answer dispatch applies across our entire service area.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Keller
Your upstairs bedrooms are likely starved for return airflow, not suffering from a weak furnace. Keller’s production builders from the late 1990s and early 2000s commonly installed one centralized return per floor to cut costs, leaving second-floor rooms with no path for cool air to cycle back to the system. The furnace runs, the thermostat downstairs satisfies, and upstairs stays cold. Adding dedicated bedroom returns often costs less than the oversized replacement unit some contractors recommend. Call (984) 538-9003 and we’ll measure your static pressure and show you the actual fix.
It depends on what’s wrong and whether the heat exchanger is intact. A failed ignitor or blower motor on an otherwise sound furnace is usually worth fixing. A cracked heat exchanger on a 20-year-old unit typically isn’t, especially if the system was charged with R-22 refrigerant on the cooling side. We inspect the heat exchanger with a camera on every service call and show you what we find. If replacement makes more sense, we’ll run a proper load calculation rather than sell you the same oversized unit the builder installed. Call (984) 538-9003 for a free assessment.
Keller’s noise ordinances primarily affect outdoor equipment placement and operation hours, not the repair work itself. If your heat pump’s outdoor unit has developed a failing contactor or compressor noise that triggers neighbor complaints, we can address the mechanical cause and discuss sound-dampening mounting options if relocation isn’t practical. For furnace repairs, the work is indoors and not subject to noise restrictions. We schedule all work at your convenience, including evenings and weekends. Call (984) 538-9003 to discuss your specific situation.
Yes, in specific cases. If your Keller home has a single-return-air configuration that would require extensive drywall work to fix, or if you’re adding conditioned space where duct extension is impractical, a ductless mini-split can provide zoned heating and cooling without tearing into walls. We’ve installed mini-splits in upstairs bonus rooms, garage conversions, and homes where the original ductwork is simply too compromised to salvage. We don’t default to mini-splits as a band-aid, but they’re a legitimate tool when the duct geometry is the real enemy. Call (984) 538-9003 and we’ll evaluate your home’s layout honestly.
Keller’s location in the hard-freeze corridor means your furnace goes from occasional use to continuous operation literally overnight, and the components most likely to fail are the ones that haven’t been stressed since last winter. Ignitors crack from thermal shock. Capacitors that tested marginal in fall drop below starting tolerance. Heat exchangers that have been thermally cycling for 20 years finally crack under the sustained load. The pattern is so consistent that we schedule preventive maintenance calls heavily in September and October for exactly this reason. If your furnace failed during the first freeze, call (984) 538-9003, we’ll fix what’s broken, and we’ll show you what to watch for before next winter.
Ready to get your Keller home warm again? Call Brandt HVAC at (984) 538-9003. A live person will answer, we’ll send you our technician’s name and photo before they arrive, and you’ll get a written price before any work begins. That’s how we’ve worked since 2003, and that’s how we’ll work in your home.
Written by Devin Marlowe, Owner at Brandt HVAC, serving Keller and the Dallas-Fort Worth area.