Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Kenmore
Most furnace repairs in Kenmore run $150 – $700 and our Furnace Repair team can usually diagnose the problem and give you a written price the same day you call. When your heat goes out on a cold night near Lake Washington, you need someone who knows the local housing stock and can get there fast. We dispatch from our New York City scheduling office and route crews directly to Kenmore neighborhoods, including the low-lying streets between SR-522 and the shoreline where crawl-space moisture creates its own set of furnace headaches. Call (984) 538-9003 and a live person will answer, 24 hours a day. No phone trees. No callback queues.
Why Brandt HVAC Is Kenmore’s Preferred Furnace Repair Company
We’ve been serving Kenmore long enough to know the difference between a ranch off NE 181st St and a split-level near the Sammamish River slough. That local knowledge matters when your furnace quits. Our technicians are background-checked and identity-verified through our Threshold Verified standard, and we send you their name and photo before they arrive. At your door, they show a photo ID badge. If anyone shows up who you weren’t expecting, that visit is on us.
Our phones are staffed by a live person around the clock, including weekends and holidays. We don’t do voicemail. When you call (984) 538-9003, you talk to a human who can dispatch a crew to Kenmore and give you a real arrival window.
Every repair starts with a written price before any work begins. No exceptions. Every repair also carries our 365-Day Done Right Promise: if the fix fails, we return at no charge and make it right. That guarantee is written on every invoice, so there’s no argument later about what was promised.
Gas Furnace Repair in Kenmore
Gas Furnace Repair in Kenmore is complicated by the fact that large portions of the city never got natural gas mains. Where gas is available, usually in pockets near SR-522 and the incorporated commercial corridors, we repair igniters, gas valves, heat exchangers, and blower motors on Rheem, York, Daikin, Bryant, and other major brands. A typical gas furnace repair in Kenmore costs $150 – $700, depending on whether you’re looking at a simple igniter swap or a heat-exchanger replacement. Because many Kenmore homes with gas were built in the 1960s and 70s, we often find original ductwork that was sized for older equipment and can’t handle the static pressure of modern high-efficiency furnaces.
Heat Exchanger and Gas Valve Work
A cracked heat exchanger is a safety issue we don’t negotiate around. If our combustion analysis detects CO risk, we shut the unit down and show you the readings. Gas valve failures usually show up as intermittent ignition or flame rollout. We replace the valve, test manifold pressure to spec, and verify safe operation before we leave.
Igniter and Blower Motor Replacement
Hot-surface igniters fail every 3 – 5 years in our climate, and induced-draft blower motors take a beating from the humidity that rolls off Lake Washington. We stock common igniters and capacitors for faster turnaround, and we always check whether crawl-space moisture is feeding rust into the cabinet while we’re there.
Furnace Tune Up in Kenmore
Furnace Tune Up in Kenmore should happen every fall before the heating season kicks in, and it costs $80 – $200. Given the persistent humidity in the north Lake Washington basin, a tune-up here is more than a quick filter swap. We check heat exchangers for rust, test blower amp draw against manufacturer spec, and inspect condensate drains that can clog with microbial growth in this wetter-than-average microclimate. For homes between SR-522 and the shoreline, we also look at crawl-space conditions that affect furnace longevity. A tune-up takes 60 – 90 minutes and ends with a written report of what we found, what we adjusted, and what you should watch.
What Our Tune-Up Covers
We clean flame sensors, check gas pressure or electric heat-strip amperage, test safety limits, and measure temperature rise across the heat exchanger. We also inspect your filter and return path for restrictions. In Kenmore’s older homes with original ductwork, we note static pressure readings that could be overworking your blower motor.
Why Annual Service Matters Here
The marine moisture that traps in this basin accelerates coil corrosion and electrical connection degradation. A furnace that skips annual service in Kenmore often fails mid-winter, when our crews are busiest and you’re most uncomfortable. Scheduling in September or October usually gets you next-day availability.
Trusted Brands We Service in Kenmore
We service all major residential HVAC brands including Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Kenmore customers, we stock common igniters, blower motors, and control boards for Rheem, York, and Bryant systems locally, which means faster repairs without waiting on shipping. If you own a Daikin heat pump or ductless system, we carry those parts too. Our technicians are trained on both legacy equipment and newer variable-speed systems, so whether your furnace is fifteen years old or two, we can diagnose it and fix it without guessing.
Common Furnace Repair Problems We See in Kenmore Homes
- Crawl-space humidity rusting out heat exchangers. The low-lying streets between SR-522 and the Lake Washington shoreline regularly see standing ground moisture. That humidity wicks into furnace cabinets and ductwork, rusting heat exchangers and growing mold in the plenum within two seasons. We spec vapor barriers and sealed-crawl encapsulation as part of any lasting fix.
- Undersized original ductwork overloading blower motors. Kenmore’s 1950s – 1970s homes were built with ductwork sized for old electric or oil furnaces. Modern high-efficiency gas furnaces and heat pumps need more airflow. The static pressure cooks blower motors and leads to premature failure. A like-for-like swap without duct assessment usually disappoints.
- Single-zone systems creating uneven heat. Post-WWII ranches and split-levels in Kenmore often have one thermostat for the whole house. Upstairs bedrooms run cold while the main floor overheats, so owners crank the thermostat and run the furnace harder than it was designed for. The fix is often zoning or duct modification, not just a bigger furnace.
- Failed igniters and weak capacitors in humid conditions. On a split-level off NE 181st St near the Sammamish River slough, our tech traced a no-heat call on a 2005 Carrier gas furnace to a failed hot-surface igniter and a weak capacitor on the induced-draft blower motor, then found standing moisture in the crawl feeding rust into the plenum. We replaced the igniter and capacitor, sealed the plenum joint, and spec’d a vapor barrier, and the unit has run clean through two winters since.
Pricing for Furnace Repair in Kenmore, NY
We’re upfront about what furnace repair costs in Kenmore because nobody likes sticker shock after the work is done. Here’s what you can expect:
| Service | Price Range |
|---|---|
| Furnace Repair | $150 – $700 |
| Furnace Tune Up | $80 – $200 |
Most igniter replacements fall in the $150 – $300 range, parts and labor included. Blower motor repairs or replacements run higher, usually $400 – $700. Heat exchanger work sits at the top of the range and sometimes tips past it if the unit is in a tight crawl space or if we find secondary damage from rust. What drives cost up: accessibility (crawls vs. basements), parts availability for older units, and whether we discover moisture damage that needs addressing before the repair will last. We give you a written price before any work starts. Estimates are free. Call (984) 538-9003 to schedule.
We Also Serve Cities Near Kenmore
Our crews work throughout the metro area. If you need Furnace Repair in Kenmore or in Brooklyn, Queens, Manhattan, or Staten Island, we route technicians from the same local pool. Scheduling is coordinated from our New York City office, but the tech who shows up at your door knows your neighborhood’s housing stock and climate quirks.
Serving Kenmore, NY - Our Local Coverage Area
We’re based in the Kenmore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Kenmore
The ductwork is almost certainly the problem, not the furnace itself. Single-zone systems in Kenmore split-levels were designed for a different era of heating expectations. We can sometimes improve airflow with duct modifications or add a zone control system, but putting in a bigger furnace without fixing the distribution just wastes fuel and shortens equipment life. Call (984) 538-9003 and we’ll assess whether repair or ductwork modification is the right path.
Kenmore sits at the north end of Lake Washington where the Sammamish River feeds in, creating a persistently humid microclimate that is measurably wetter than Bothell or Lake Forest Park. The marine moisture traps in this basin and wicks into crawl spaces and furnace cabinets. If your home is between SR-522 and the shoreline, the effect is even stronger. A vapor barrier and sealed-crawl encapsulation often do more for furnace longevity than any equipment upgrade. We check crawl conditions on every service call and will show you what we’re seeing.
That depends on the condition of your unit, your electrical panel capacity, and whether Washington State’s heat-pump electrification incentives apply to your situation. Many Kenmore homes were built with electric baseboard heat and no ductwork, so a ductless mini-split conversion is often more practical than forcing ductwork into a structure that was never designed for it. We can repair your existing electric furnace if it’s worth keeping, but we’ll also give you straight talk on when replacement makes more sense. Estimates are free – call (984) 538-9003.
Once a year, every fall, before the heating season starts. The humidity in Kenmore’s Lake Washington basin accelerates corrosion and microbial growth inside air handlers, so skipping a year here has more consequence than in drier climates. A tune-up costs $80 – $200 and includes a written report of everything we found. Call (984) 538-9003 to schedule before the October rush.
Most furnace repairs in Kenmore run $150 – $700, with simple igniter swaps at the low end and blower motor or heat exchanger work at the high end. We give you a written price before any work starts, and our 365-Day Done Right Promise covers the repair if it fails. For an exact quote on your specific system, call (984) 538-9003 – estimates are free.
Written by Devin Marlowe, Owner at Brandt HVAC, serving Kenmore and the greater metro area. Brandt HVAC is part of the Threshold Group family of home-service companies, established in 2003.