Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Kennesaw
Most furnace repairs in Kennesaw run $150 – $700 and are completed in a single visit. Our team dispatches from our Atlanta office and typically reaches Kennesaw homes within 60 – 90 minutes during business hours, with live phone support around the clock at (984) 538-9003. When your heat goes out and temperatures drop into the teens during one of our winter Arctic intrusions, that speed matters.
We’ve worked in Kennesaw long enough to know the difference between a Legacy Park two-story built in 1999 and a newer build off Wade Green Road. The housing stock here isn’t random. Vast tracts of similarly-aged subdivisions went up between 1988 and 2008 with identical builder-grade 80% AFUE gas furnaces, minimum-spec ductwork, and single-zone controls. That concentration shapes every repair call we take. We’re not guessing at what we’ll find when we pull up to a Kennesaw address. We already know the likely vintage, the probable failure mode, and whether the original ductwork can handle what a modern replacement actually requires.
Why Brandt HVAC Is Kennesaw’s Preferred Furnace Repair Company
Kennesaw homeowners call us back because we name our technicians before they arrive. Through our Threshold Verified standard, you’ll receive a photo, name, and background-checked credentials for whoever is coming to your door. They’ll show a photo ID badge when they get there. If someone shows up who you weren’t told to expect, that visit is on us and we make it right.
Our Furnace Repair team carries parts for Rheem, York, Daikin, Bryant, and every other major brand we service. That matters in Kennesaw, where a failed ignitor on a 2004 York in a Due West Road corridor subdivision shouldn’t mean waiting three days for a part order. We stock what breaks most often on the equipment installed during Kennesaw’s build boom.
Every repair starts with a written price. No work begins until you see the cost and agree to it. Every repair also carries a written guarantee under our 365-Day Done Right Promise. If the repair fails within that year, we return at no charge. No argument, no additional fee.
Phones are answered by a live person 24 hours a day, 7 days a week. Nights, weekends, holidays. No voicemail trees, no callback queues.
Gas Furnace Repair in Kennesaw
Gas Furnace Repair in Kennesaw most often means addressing cracked heat exchangers, failed ignitors, and blower motors overworked by undersized ductwork in the 1990s – 2000s subdivisions that dominate this market. A typical repair runs $150 – $700 depending on the component and accessibility. We see the highest call volume from Legacy Park, neighborhoods along Bells Ferry Road, and the corridors off Due West Road, where original 80% AFUE units are simultaneously hitting or exceeding their 15 – 20 year service life.
Heat Exchanger Safety Checks
A cracked heat exchanger is the repair we take most seriously. Combustion gases can leak into your living space. Our technicians test every heat exchanger with visual inspection and combustion analysis. If we find a crack, we’ll show you the evidence and explain your options. Replacement is often the safer path on units past 15 years, but we’ll give you the honest assessment, not a sales push.
Ignitor and Gas Valve Replacement
Hot surface ignitors fail predictably after 5 – 7 years of Kennesaw heating cycles. Gas valves stick from sediment in the line. Both are straightforward repairs when diagnosed correctly. We carry the common ignitor patterns for Rheem, York, and Bryant units on our trucks, so most Kennesaw homeowners have heat restored same-day.
Furnace Tune Up in Kennesaw
Furnace Tune Up in Kennesaw costs $80 – $200 and should happen every fall before the first hard freeze. In our humid Piedmont climate, the furnace sits idle through five months of heavy AC use, then gets called into sudden duty when an Arctic intrusion drops temperatures into the teens. Deferred startup stress kills more ignitors and blower motors in Kennesaw than continuous winter operation does.
What We Check and Clean
Our tune-up covers combustion analysis, heat exchanger inspection, blower amp draw, gas pressure verification, and filter assessment. We measure temperature rise across the heat exchanger and static pressure in the ductwork. High static pressure from leaky, undersized original ducts is the hidden problem in most Kennesaw homes. It shows up as a number on our gauge long before you notice uneven heating.
Written Report, No Sales Pressure
You’ll get a written report of what we found, what we adjusted, and what we recommend watching. Our technicians are not paid on what they sell. The report is yours to keep, use, or ignore. If everything checks out, we’ll tell you that plainly.
Trusted Brands We Service in Kennesaw
We repair and maintain Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard equipment. Our Atlanta-area parts inventory covers the most common failure components for the Rheem, York, Daikin, and Bryant units installed across Kennesaw’s 1990s – 2000s subdivisions. That local stocking means faster turnaround on repairs and fewer return trips. When a Legacy Park homeowner calls with a dead York furnace on a Saturday evening, we don’t wait until Monday to source the ignitor.
Common Furnace Repair Problems We See in Kennesaw Homes
- Cracked heat exchangers in original 80% AFUE furnaces. These units were installed by the thousands during Kennesaw’s build boom and are now aging out together. A cracked exchanger is a safety replacement, not a patch job, and we see them clustered on single streets where every home went up in the same phase.
- Blower motors overworked by high static pressure. The original ductwork in Kennesaw’s two-story brick-front subdivisions was sized to minimum code with runs through unconditioned attics. Leaks and restrictions force the blower to pull harder, overheat, and eventually fail. The motor is the symptom. The ductwork is the disease.
- Single-zone systems fighting unbalanced floor plans. Upstairs bedrooms stay cold while the thermostat downstairs reads satisfied. The furnace runs continuously, wears prematurely, and still doesn’t deliver comfort. This is a design problem, not a furnace problem, though the furnace pays the price.
- Capacitor and ignitor failures in deferred student rentals. Near Kennesaw State University, hard-run rental units with clogged filters and skipped tune-ups push components to early failure. We’ve replaced capacitors on units where the filter hasn’t been changed in two years.
Pricing for Furnace Repair in Kennesaw, GA
| Service | Price Range in Kennesaw |
|---|---|
| Furnace Repair | $150 – $700 |
| Furnace Tune Up | $80 – $200 |
What moves a repair toward the higher end? Accessibility matters. A blower motor buried in a tight attic closet off Bells Ferry Road takes longer than one in a spacious basement utility room. Heat exchanger replacement on a 20-year-old unit often tips toward full system replacement once you factor the limited remaining lifespan. We give you the written price for each option and let you decide. Estimates are free. Call (984) 538-9003 to schedule.
We Also Serve Cities Near Kennesaw
Our crews work throughout Cobb and Cherokee counties, with regular calls in Kennesaw, Acworth, Marietta, Woodstock, and Powder Springs. Dispatch and scheduling are coordinated from our Atlanta office, but the technicians who arrive at your door live and work in this area. They know the difference between a 1995 build in Acworth and a 2005 build in Woodstock, and they carry the parts matched to those vintages.
Serving Kennesaw, GA - Our Local Coverage Area
We’re based in the Kennesaw area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Kennesaw
Replace if your unit is past 15 years and the repair exceeds 30% of replacement cost, especially if the original ductwork is leaky or undersized. In Kennesaw’s same-era subdivisions, we often find that a like-for-like swap disappoints because the new furnace is fighting the same bad ductwork and single-zone layout. We run load calculations and static pressure tests before quoting replacement, so you know whether the infrastructure needs attention too. Call (984) 538-9003 for a free evaluation.
Your single-zone system was designed to treat one open space, not a two-story plan with closed bedrooms upstairs. The thermostat downstairs reads warm while heat stratifies and leaks through attic ductwork. We measure temperature splits and static pressure to confirm, then discuss zoning or duct modification options. The furnace isn’t broken. The system design is mismatched to the house.
Cracked heat exchangers in the original 80% AFUE gas furnaces installed across Kennesaw’s 1990s – 2000s build phases. These units are now hitting the 15 – 20 year replacement window simultaneously, which is why you’ll see multiple service trucks on the same street in a single week. We test every exchanger with combustion analysis and show you the results.
Yes, primarily through what happens during the five-month cooling season. Your furnace sits idle while attic ductwork sweats from humidity and temperature differentials. That moisture degrades connections, rusts heat exchangers, and breeds microbial growth in the plenum. When the first Arctic intrusion hits, the furnace starts up stressed. Fall tune-ups catch this degradation before it becomes a mid-winter failure.
Most furnace repairs in Kennesaw run $150 – $700, with simple fixes like ignitor or capacitor replacement at the lower end and blower motor or heat exchanger work toward the higher end. We provide a written, itemized price before any work begins. Estimates are free. Call (984) 538-9003 to schedule yours.
Brandt comes from an old word for a firebrand. Keeping a home warm is literally what the name means. If your Kennesaw furnace is struggling, running constantly, or blowing cold air, we’re here to diagnose it honestly, price it upfront, and send someone you can identify before they knock. Live person on the phone, 24 hours a day.
Written by Devin Marlowe, Owner at Brandt HVAC, serving Kennesaw and the surrounding area.