Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterHVAC Company in Kenmore, WA
Most HVAC calls in Kenmore involve homes built without ductwork and systems fighting a persistently humid lakeside climate. We’re Brandt HVAC, and our technicians handle everything from emergency furnace repairs on cold January nights to ductless mini-split installations for homeowners converting off electric baseboard heat. If you need help now, call us at (984) 538-9003 – a live person answers, 24 hours a day.
Kenmore’s location at the north end of Lake Washington creates conditions we don’t see even in neighboring Bothell. The Sammamish River delta traps marine moisture, crawl spaces stay damp year-round, and the city’s pre-1997 housing stock was built for an era of cheap electricity, not modern heat-pump efficiency. That combination means every job here requires different equipment specs, different installation approaches, and different maintenance priorities than standard suburban HVAC work.
Why Kenmore Homes Are Different
Kenmore sits where the Sammamish River feeds into Lake Washington, and that water geography creates a microclimate measurably wetter than upland areas just a few miles east. Marine moisture and fog settle into the basin and don’t lift. For HVAC systems, that means evaporator coils corrode faster, air handlers grow microbial buildup, and crawl-space humidity wicks into ductwork and plenums within two seasons if vapor barriers aren’t spec’d correctly.
The housing stock compounds the challenge. Most neighborhoods – Inglewood, Moorlands, Northlake Terrace – were built during King County’s unincorporated era from the 1950s through 1970s as ranch and split-level homes. Electric baseboard heat was standard; ductwork was absent. Natural gas never reached large portions of the city. Today, Washington State’s heat-pump electrification push leaves Kenmore homeowners with no existing duct infrastructure to leverage, making ductless mini-split retrofits the defining project type here.
Homes on the low-lying streets between SR-522 and the lake shoreline are especially vulnerable. Standing ground moisture and crawl-space humidity are common enough that our technicians automatically spec sealed-crawl encapsulation and vapor barriers with any below-grade air handler or ductwork install. Skip that step, and callbacks for mold in the plenum follow fast.
Summers stayed mild enough that many older residents never installed cooling. But back-to-back summers with 100°F heat events have changed that calculation sharply, even for lakeside homes that historically relied on evening breezes.
Our Main Kenmore Services
These are the three services Kenmore homeowners call us about most. Each has its own dedicated page with full pricing, what to expect, and local specifics.
AC Repair in Kenmore
AC repair in Kenmore usually means one of three things: a failed compressor in a recently added heat pump, a refrigerant leak in corroded coastal coils, or a ductless mini-split that won’t cool after a humid winter. We stock capacitors, contactors, and refrigerant for Trane, Lennox, Goodman, and Rheem systems locally, and most repairs finish same day. AC Repair in Kenmore covers common failures, what drives cost up or down, and when replacement makes more sense.
Furnace Repair in Kenmore
Furnace repair here spans electric baseboard elements, older oil-forced-air conversions, and newer heat pumps in defrost-mode trouble. The humid climate stresses heat exchangers and ignition components differently than drier inland areas. We see a lot of failed sequencers in electric furnaces and cracked heat exchangers in older gas conversions. Our Furnace Repair in Kenmore page breaks down typical costs, what’s fixable versus replaceable, and how fast we can get there.
AC Maintenance in Kenmore
Maintenance in Kenmore isn’t a generic tune-up. Coil cleaning is essential – the marine moisture here accelerates corrosion and biological growth inside air handlers that wouldn’t happen in Redmond or Issaquah. We check refrigerant levels, test defrost cycles on heat pumps, and inspect crawl-space components for moisture intrusion. Annual maintenance catches the problems this climate creates before they become emergency calls. AC Maintenance in Kenmore has our full checklist and flat-rate pricing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Kenmore
We repair and maintain all major residential HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Kenmore’s common Trane, Lennox, Goodman, and Rheem systems, we stock capacitors, contactors, igniters, and blower motors locally. Most part-dependent repairs finish same day without waiting on Seattle warehouse delivery. See our brands for full coverage details.
Pricing for HVAC Company in Kenmore, WA
| Service | Typical range in Kenmore |
|---|---|
| AC Repair | $150 – $650 |
| Furnace Repair | $150 – $700 |
| AC Installation | $3,500 – $7,500 |
| Tune-Up / Maintenance | $80 – $200 |
What pushes Kenmore jobs toward the higher end: ductless mini-split retrofits requiring electrical upgrades, crawl-space moisture remediation before equipment install, and corrosion damage from the lakeside humidity requiring coil or heat exchanger replacement. Every job starts with a written price – no work begins until you see and approve the cost in writing.
Neighborhoods We Serve in Kenmore
Our technicians live and work throughout the Kenmore area. Most calls reach any of these neighborhoods within 30 minutes during business hours, and our 24/7 live-answer dispatch coordinates from our Seattle office to get crews moving fast.
- Inglewood
- Moorlands
- Northlake Terrace
- Kenmore Terrace
- Arrowhead
Service Area – Cities Near Kenmore
We serve homeowners throughout the north Lake Washington corridor. Our regular service area includes Bothell, WA to the east, Woodinville, WA in the Sammamish Valley, Lynnwood, WA to the north, and Mountlake Terrace, WA along I-5. If you’re unsure whether your address falls within our dispatch zone, call us and we’ll confirm immediately.
Serving Kenmore, WA - Our Local Coverage Area
We’re based in the Kenmore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Kenmore
Most emergency calls in Kenmore receive same-day response, and our phones are answered by a live person 24 hours a day – no voicemail, no callback queue. Dispatch coordinates from our Seattle office to route the nearest available technician. Call (984) 538-9003 anytime for current availability.
Yes. The City of Kenmore requires permits for furnace and AC replacement, and inspections for most equipment changes. We pull permits as part of our standard installation process and schedule inspections so you don’t have to coordinate with the city yourself.
Absolutely. In fact, ductless mini-split retrofits are our most common installation project in Kenmore because so much of the housing stock was built with electric baseboard heat and no ducts. We size each zone individually, run refrigerant lines through exterior walls, and handle the electrical upgrades most retrofits require.
What happens when you call
- 1A real person answersNo phone trees - talk to a local hvac pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Kenmore Customers Say
"Knowing a vetted tech was coming into my house made a difference. Name and photo texted ahead, shoe covers, polite, and thorough with explaining."
- Tina M."Drain line was clogging and causing a leak by the air handler. They cleared it and installed a float switch so it can't flood again."
- Nora T."AC stopped cooling on a hot afternoon. Tech arrived with a badge, checked the capacitor, found it bad, and replaced it on the spot. House cooled down within the hour."
- Steve P.